發布時間：2018-05-28 08:05

  本文選題：六西格瑪管理 + 流通合格率��； 參考：《機械設計與制造》2017年08期

【摘要】：針對J公司鋼鋸條生產流通合格率低的問題,引入六西格瑪質量管理模式對鋸條生產車間存在的問題進行研究。對鋸條生產過程進行遍歷分析并初步確定原因范圍,運用失效模式及影響分析(FMEA)進行篩選,確定影響鋸條流通合格率的關鍵因素。并采用正交試驗法對關鍵因素進行實驗設計以尋求最佳的生產條件組合,進行先導性研究,對改善效果進行檢驗。結合Minitab統計軟件的應用,對改善過程中的統計數據進行分析,最終幫助J公司實現了六西格瑪管理模式在鋸條生產車間的成功導入,有效提高了鋸條生產流通合格率及企業的質量管理水平。
[Abstract]:In order to solve the problem of low qualified rate of steel saw blade production in J Company, six Sigma quality management model was introduced to study the problems existing in saw blade production workshop. The traversal analysis of the production process of saw blade is carried out and the cause range is preliminarily determined. The failure mode and influence analysis are used to screen out the key factors that affect the qualified rate of the saw blade circulation. The orthogonal test was used to design the key factors in order to find the best combination of production conditions, to carry out the pilot study and to test the improvement effect. Combined with the application of Minitab statistical software, this paper analyzes the statistical data in the process of improvement, and finally helps J Company to realize the successful introduction of six Sigma management mode in the saw blade production workshop. Effectively improve the production and circulation of saw blade qualified rate and enterprise quality management level.
【作者單位】： 中國礦業大學礦業工程學院;
【分類號】：F426.31;TG717

【相似文獻】

相關會議論文 前1條

1 張衛紅;;六西格瑪管理技術在模具制造中的應用[A];節能環保 和諧發展——2007中國科協年會論文集（一）[C];2007年

，

本文編號：1945945