纖維輕骨料混凝土基本力學性能與保溫性能試驗研究
發布時間：2018-10-05 06:35
【摘要】：輕骨料混凝土具有質量輕、耐火性能好、抗震性能佳、保溫隔熱效果好等優點,廣泛應用于工民建及其他工程中。但是輕骨料混凝土的脆性比較大,容易發生開裂與脆性破壞,已經限制其在現實工程中的應用。研究發現,在輕骨料混凝土中摻加適量的纖維可以改善其力學性能,能夠明顯提高輕骨料混凝土的抗拉和抗折性能,阻止裂縫的擴展,改變其破壞形態。通過單摻玄武巖纖維、聚丙烯纖維對各種不同摻量下的纖維輕骨料混凝土試塊進行相關力學性能試驗、表觀密度和保溫隔熱性能試驗研究,最終確定出最佳摻量,并進行節能設計。將玄武巖纖維和聚丙烯纖維兩個因素作為參數進行了試驗設計,玄武巖纖維摻量為 Okg/m3、1kg/m3、2kg/m3、3kg/m3,聚丙烯纖維摻量為 Okg/m3、0.3kg/m3、0.6kg/m3、0.9kg/m3。其中基本力學性能試驗總共設計7組試驗,對不同纖維摻量下的輕骨料混凝土進行抗壓強度、劈裂抗拉強度、抗折強度對比,在確定最佳摻量為玄武巖纖維摻量3kg/m3后,還進行了輕骨料混凝土的干表觀密度試驗和保溫隔熱性能試驗�？箟簭�(qiáng)度試驗表明,在單摻玄武巖纖維情況下,玄武巖纖維在摻量為3kg/m3時對輕骨料混凝土的抗壓強度增長幅度最大;在單摻聚丙烯纖維時,除了摻量為0.3kg/m3的聚丙烯纖維使得輕骨料混凝土抗壓強度增長了 3.3%,其他兩種摻量都對輕骨料混凝土的抗壓強度有不同程度的降低。在破壞形態方面聚丙烯纖維和玄武巖纖維能夠較好的減少試塊的裂縫數,使其破壞呈現出塑性破壞狀態。劈裂抗拉強度試驗表明,無論是摻加玄武巖纖維還是聚丙烯纖維,對于輕骨料混凝土的劈裂抗拉強度都起到了較好的增強作用。單摻玄武巖纖維時,對于輕骨料混凝土的劈裂抗拉強度增強效果均達到了 30%以上,其中在玄武巖纖維摻量為1kg/m3時,輕骨料混凝土劈裂抗拉強度增長率最高為35%,而在摻量為3kg/m3時劈裂抗拉強度也增強了 33.9%。摻加聚丙烯纖維后,對于提高輕骨料混凝土的劈裂抗拉強度有明顯的效果,在摻量為0.3kg/m3時對輕骨料混凝土的劈裂抗拉強度增強效果最高,增長率為27%�？拐蹚�(qiáng)度試驗表明,玄武巖纖維和聚丙烯纖維的摻入,均能夠提高輕骨料混凝土的抗折強度。隨著聚丙烯纖維或玄武巖纖維摻量的增加,抗折強度也逐漸增加。比較兩種纖維對輕骨料混凝土力學性能的增強效果,發現聚丙烯纖維對其抗壓強度、抗折強度提高效果不明顯,而玄武巖纖維不僅能夠稍微改善輕骨料混凝土的抗壓強度,而且能夠明顯改善其劈裂抗拉性能和抗折性能,最終確定玄武巖纖維在摻量為3kg/m3時為最佳纖維摻量。在節能設計中,纖維輕骨料混凝土墻板的節能效果能夠滿足規范要求。
[Abstract]:Lightweight aggregate concrete is widely used in civil engineering and other projects because of its advantages of light weight, good fire resistance, good seismic performance and good thermal insulation effect. However, lightweight aggregate concrete is more brittle and prone to cracking and brittle failure, which has restricted its application in practical engineering. It is found that adding appropriate amount of fiber to lightweight aggregate concrete can improve its mechanical properties, improve the tensile and flexural properties of lightweight aggregate concrete, prevent the crack from spreading and change its failure pattern. Through the experiments of mechanical properties, apparent density and heat insulation properties of fiber lightweight aggregate concrete samples with different contents of single doped basalt fiber and polypropylene fiber, the optimum content was finally determined. And carry on the energy saving design. Two factors, basalt fiber and polypropylene fiber, were used as parameters in the experiment design. The content of basalt fiber was Okg/m3,1kg/m3,2kg/m3,3kg/m3, polypropylene fiber and the content of polypropylene fiber was Okg/m3,0.3kg/m3,0.6kg/m3,0.9kg/m3.. Among them, 7 groups of basic mechanical property tests were designed. The compressive strength, splitting tensile strength and flexural strength of lightweight aggregate concrete with different fiber content were compared. After determining the optimum addition amount of basalt fiber 3kg/m3, The dry apparent density test and thermal insulation test of lightweight aggregate concrete were also carried out. The results of compressive strength test show that the compressive strength of lightweight aggregate concrete increases greatly when basalt fiber is doped with 3kg/m3, and when polypropylene fiber is added alone, the compressive strength of lightweight aggregate concrete increases greatly when the content of basalt fiber is 3kg/m3. The compressive strength of lightweight aggregate concrete is increased by 3.3% due to the addition of polypropylene fiber (0.3kg/m3), and the other two kinds of fiber have different degree of decrease on the compressive strength of lightweight aggregate concrete. Polypropylene fiber and basalt fiber can reduce the number of cracks in the specimen and show plastic failure state. The splitting tensile strength tests show that both basalt fiber and polypropylene fiber can enhance the splitting tensile strength of lightweight aggregate concrete. When basalt fiber is added alone, the splitting tensile strength of lightweight aggregate concrete can be enhanced by more than 30%, especially when the content of basalt fiber is 1kg/m3, The maximum growth rate of splitting tensile strength of lightweight aggregate concrete is 35%, while the splitting tensile strength of lightweight aggregate concrete increases by 33.9 when the content of 3kg/m3 is added. The effect of adding polypropylene fiber on the splitting tensile strength of lightweight aggregate concrete is obvious. When the content of 0.3kg/m3 is added, the effect of strengthening the splitting tensile strength of lightweight aggregate concrete is the highest, and the growth rate is 27%. The flexural strength tests show that the addition of basalt fiber and polypropylene fiber can improve the flexural strength of lightweight aggregate concrete. With the increase of polypropylene fiber or basalt fiber content, the flexural strength increases gradually. Comparing the mechanical properties of lightweight aggregate concrete with two kinds of fibers, it is found that polypropylene fiber can not improve the compressive strength and flexural strength of lightweight aggregate concrete, but basalt fiber can not only improve the compressive strength of lightweight aggregate concrete, but also improve the compressive strength of lightweight aggregate concrete. Moreover, the splitting tensile and flexural properties of basalt fiber can be improved obviously. Finally, the optimum content of basalt fiber is determined when the content of basalt fiber is 3kg/m3. In the energy-saving design, the energy-saving effect of fiber-light aggregate concrete wallboard can meet the requirements of specifications.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TU528
本文編號：2252379
[Abstract]:Lightweight aggregate concrete is widely used in civil engineering and other projects because of its advantages of light weight, good fire resistance, good seismic performance and good thermal insulation effect. However, lightweight aggregate concrete is more brittle and prone to cracking and brittle failure, which has restricted its application in practical engineering. It is found that adding appropriate amount of fiber to lightweight aggregate concrete can improve its mechanical properties, improve the tensile and flexural properties of lightweight aggregate concrete, prevent the crack from spreading and change its failure pattern. Through the experiments of mechanical properties, apparent density and heat insulation properties of fiber lightweight aggregate concrete samples with different contents of single doped basalt fiber and polypropylene fiber, the optimum content was finally determined. And carry on the energy saving design. Two factors, basalt fiber and polypropylene fiber, were used as parameters in the experiment design. The content of basalt fiber was Okg/m3,1kg/m3,2kg/m3,3kg/m3, polypropylene fiber and the content of polypropylene fiber was Okg/m3,0.3kg/m3,0.6kg/m3,0.9kg/m3.. Among them, 7 groups of basic mechanical property tests were designed. The compressive strength, splitting tensile strength and flexural strength of lightweight aggregate concrete with different fiber content were compared. After determining the optimum addition amount of basalt fiber 3kg/m3, The dry apparent density test and thermal insulation test of lightweight aggregate concrete were also carried out. The results of compressive strength test show that the compressive strength of lightweight aggregate concrete increases greatly when basalt fiber is doped with 3kg/m3, and when polypropylene fiber is added alone, the compressive strength of lightweight aggregate concrete increases greatly when the content of basalt fiber is 3kg/m3. The compressive strength of lightweight aggregate concrete is increased by 3.3% due to the addition of polypropylene fiber (0.3kg/m3), and the other two kinds of fiber have different degree of decrease on the compressive strength of lightweight aggregate concrete. Polypropylene fiber and basalt fiber can reduce the number of cracks in the specimen and show plastic failure state. The splitting tensile strength tests show that both basalt fiber and polypropylene fiber can enhance the splitting tensile strength of lightweight aggregate concrete. When basalt fiber is added alone, the splitting tensile strength of lightweight aggregate concrete can be enhanced by more than 30%, especially when the content of basalt fiber is 1kg/m3, The maximum growth rate of splitting tensile strength of lightweight aggregate concrete is 35%, while the splitting tensile strength of lightweight aggregate concrete increases by 33.9 when the content of 3kg/m3 is added. The effect of adding polypropylene fiber on the splitting tensile strength of lightweight aggregate concrete is obvious. When the content of 0.3kg/m3 is added, the effect of strengthening the splitting tensile strength of lightweight aggregate concrete is the highest, and the growth rate is 27%. The flexural strength tests show that the addition of basalt fiber and polypropylene fiber can improve the flexural strength of lightweight aggregate concrete. With the increase of polypropylene fiber or basalt fiber content, the flexural strength increases gradually. Comparing the mechanical properties of lightweight aggregate concrete with two kinds of fibers, it is found that polypropylene fiber can not improve the compressive strength and flexural strength of lightweight aggregate concrete, but basalt fiber can not only improve the compressive strength of lightweight aggregate concrete, but also improve the compressive strength of lightweight aggregate concrete. Moreover, the splitting tensile and flexural properties of basalt fiber can be improved obviously. Finally, the optimum content of basalt fiber is determined when the content of basalt fiber is 3kg/m3. In the energy-saving design, the energy-saving effect of fiber-light aggregate concrete wallboard can meet the requirements of specifications.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TU528
【參考文獻】
相關期刊論文 前10條
1 張?zhí)m芳;尹玉龍;岳瑜;;玄武巖纖維摻量對混凝土力學性能的影響[J];硅酸鹽通報;2016年09期
2 李京軍;牛建剛;吳運超;朱聰;;短切玄武巖纖維輕骨料混凝土力學性能試驗研究[J];建筑結構;2016年15期
3 牛建剛;李京軍;劉洪振;張宗星;;鋼纖維摻量對輕骨料混凝土力學性能的影響[J];施工技術;2015年15期
4 曹敏;;雙摻玄武巖纖維和陶砂對混凝土收縮開裂性能的影響[J];混凝土與水泥制品;2015年03期
5 張慶兵;周山山;許夢飛;;輕骨料混凝土的強度影響因素分析[J];河南城建學院學報;2015年01期
6 張?zhí)m芳;尹玉龍;劉晶偉;梁秋爽;;玄武巖纖維增強混凝土力學性能的研究[J];硅酸鹽通報;2014年11期
7 董喜平;李紅云;鄒春霞;;混雜纖維輕骨料混凝土力學性能試驗研究[J];硅酸鹽通報;2014年11期
8 朱洪峰;;房屋建筑施工中節能技術應用[J];建設科技;2014年05期
9 趙麗杰;吳昊;;聚丙烯纖維的摻入對混凝土力學性能的影響研究[J];科技與企業;2013年17期
10 張守元;王玉江;;聚丙烯纖維對混凝土性能影響的實驗研究[J];洛陽理工學院學報(自然科學版);2013年01期
，本文編號：2252379
本文鏈接：http://www.wukwdryxk.cn/jianzhugongchenglunwen/2252379.html
最近更新
教材專著
