電梯光電編碼器接口轉換技術研究
發布時間：2019-01-04 15:02
【摘要】：如今電梯已成為人們進出高層建筑不可或缺的代步工具,而且作為載人工具,人們首先會關注它的安全質量問題,其次對它運行的平穩性、高速性、準確性、舒適性等一系列動、靜態性能也提出了更高的要求。光電旋轉編碼器是用于電梯控制系統的關鍵部件,它能否實時、準確地反饋電動機轉子角度信息至關重要。本文針對一款電梯控制系統常用的光電編碼器——海德漢ERN1387進行了接口轉換技術的研究。ERN1387是光電增量旋轉編碼器,它的優點是傳輸出連續的增量信號,除了能夠提供普通增量編碼器傳輸?shù)腁、B、R三路信號外還提供了C、D兩路信號,它的線數是2048,精度能夠達到±20″,是電梯控制系統中的一種高精度編碼器。在對編碼器輸出的信號進行處理過程中,關鍵技術是電子學細分技術,它包括硬件細分和軟件細分,其中軟件細分是本文討論的重點。硬件細分包括信號放大器、模數轉換和數字運算三個部分。而軟件細分的方法有多種,本文介紹了幾種軟件細分方法,選擇了其中的正切插值細分算法對實際電動機編碼器傳輸出的信號進行細分處理,通過STM32微控制器實現8倍細分。機電聯調實驗表明本文設計的編碼器接口電路和軟件細分程序是可行的,并對實驗結果進行了誤差分析。
[Abstract]:Today the elevator has become an indispensable tool for people to move in and out of high-rise buildings, and as a human tool, people first pay attention to its safety and quality, and then to its smooth, high speed, accuracy. Comfort and a series of dynamic and static performance also put forward higher requirements. Photoelectric rotary encoder is the key component of elevator control system. It is very important to feedback the rotor angle information of motor in real time and accurately. In this paper, the interface conversion technology of Hyderham ERN1387, a photoelectric encoder commonly used in elevator control system, is studied. ERN1387 is a photoelectric incremental rotary encoder, whose advantage is to transmit continuous incremental signals. In addition to the three channel signals of Agna BU R, which can be transmitted by ordinary incremental encoder, two channels of Con D signal are also provided. The number of lines is 2048 and the precision can reach 鹵20 ". It is a kind of high precision encoder in elevator control system. In the process of processing the output signal of encoder, the key technology is electronic subdivision, which includes hardware subdivision and software subdivision, among which software subdivision is the focus of this paper. Hardware subdivision includes signal amplifier, A-D conversion and digital operation. There are many methods of software subdivision. This paper introduces several software subdivision methods, selects the tangent interpolation subdivision algorithm to subdivide the signal transmitted by the actual motor encoder, and realizes 8 times subdivision by STM32 microcontroller. The experiment shows that the interface circuit and the software subdivision program designed in this paper are feasible, and the error analysis of the experimental results is carried out.
【學位授予單位】：蘇州大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU857;TN762
本文編號：2400444
[Abstract]:Today the elevator has become an indispensable tool for people to move in and out of high-rise buildings, and as a human tool, people first pay attention to its safety and quality, and then to its smooth, high speed, accuracy. Comfort and a series of dynamic and static performance also put forward higher requirements. Photoelectric rotary encoder is the key component of elevator control system. It is very important to feedback the rotor angle information of motor in real time and accurately. In this paper, the interface conversion technology of Hyderham ERN1387, a photoelectric encoder commonly used in elevator control system, is studied. ERN1387 is a photoelectric incremental rotary encoder, whose advantage is to transmit continuous incremental signals. In addition to the three channel signals of Agna BU R, which can be transmitted by ordinary incremental encoder, two channels of Con D signal are also provided. The number of lines is 2048 and the precision can reach 鹵20 ". It is a kind of high precision encoder in elevator control system. In the process of processing the output signal of encoder, the key technology is electronic subdivision, which includes hardware subdivision and software subdivision, among which software subdivision is the focus of this paper. Hardware subdivision includes signal amplifier, A-D conversion and digital operation. There are many methods of software subdivision. This paper introduces several software subdivision methods, selects the tangent interpolation subdivision algorithm to subdivide the signal transmitted by the actual motor encoder, and realizes 8 times subdivision by STM32 microcontroller. The experiment shows that the interface circuit and the software subdivision program designed in this paper are feasible, and the error analysis of the experimental results is carried out.
【學位授予單位】：蘇州大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU857;TN762
【參考文獻】
相關博士學位論文 前1條
1 洪小圓;基于永磁同步電機的電梯運動控制研究[D];浙江大學;2012年
相關碩士學位論文 前1條
1 徐曉丹;增量式光電編碼器的細分技術研究[D];長春理工大學;2010年
，本文編號：2400444
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/dianzigongchenglunwen/2400444.html
最近更新
教材專著
