發布時間：2018-06-11 23:08

  本文選題：嵌入式網關 + CAN總線��； 參考：《武漢理工大學》2013年碩士論文

【摘要】：隨著計算機技術、通信技術以及嵌入式技術的飛速發展,實現現場底層監測設備與以太網(Ethernet)的無縫連接,完成管理信息網絡與現場測控網絡的信息共享,成為當今工業發展越來越迫切的需求。然而,目前的許多現場監測設備都是基于如LonWorks、DeviceNe、CAN-Bus等通信接口來組成輕量級網絡,而企業的上層管理網絡則是基于以太網和TCP/IP協議的管理信息網絡,兩者無法直接通信。本論文就是在這一應用背景下,致力于解決CAN總線和以太網兩種異構網絡之間的數據不能共享這一問題。 本文在深入地研究了CAN協議、TCP/IP協議以及LwIP協議棧的特點及實現原理的基礎上,以STM32F107VCT6微處理器為硬件平臺,μC/OS-Ⅱ?yàn)檐浖�平臺,開發了一種高效節能的嵌入式CAN-Ethernet互聯網關,并允許在遠程控制室對現場設備進行訪問,實現對現場控制系統的遠程監控與實時管理。 論文首先介紹了嵌入式網關系統以及CAN和以太網總線協議的基本知識；然后詳細討論了系統的硬件電路設計、CAN與以太網功能模塊電路的調試；接著概述了μC/OS-Ⅱ操作系統的特點及其內核工作機制,闡述了μC/OS-Ⅱ在STM32F107VCT6上的移植以及LwIP協議棧在μC/OS-Ⅱ系統上的移植過程,并進行了系統驅動程序的設計以及串口通信的實現,另外設計了上位機監測軟件,實現以太網服務器對CAN現場總線系統的實時監控；最后給出了針對該嵌入式網關系統的配置文件設計和實驗室環境下的調試結果。 將本文所設計的CAN-Ethernet協議轉換互聯網關應用到搭建的開發平臺中,通過串口通信模塊來采集數據,同時,利用上位機測試軟件來顯示其通訊情況,物理仿真結果表明,該互聯網關性能基本滿足預定要求,能實現CAN總線和以太網兩種異構網絡之間協議轉換的功能。
[Abstract]:With the rapid development of computer technology, communication technology and embedded technology, it realizes the seamless connection between the field bottom monitoring equipment and Ethernet Ethernet, and accomplishes the information sharing between the management information network and the field measurement and control network. It has become a more and more urgent demand for the development of industry today. However, many on-site monitoring devices are based on communication interfaces such as LonWorks DeviceNeine CAN-Bus to form a lightweight network, while the upper management network of enterprises is a management information network based on Ethernet and TCP / IP protocol, which can not communicate directly between them. This paper is in this application background, This paper focuses on solving the problem that data can not be shared between can bus and Ethernet. This paper studies the characteristics and implementation principle of can protocol TCP / IP protocol and LwIP protocol stack. Using STM32F107VCT6 microprocessor as hardware platform and 渭 C / OS- 鈪，

本文編號：2007056