發布時間：2018-06-14 00:09

  本文選題：微處理器體系結構 + 多核處理器��； 參考：《北京郵電大學》2012年碩士論文

【摘要】：計算機系統模擬對于現代計算機系統的設計十分重要,尤其是在處理器設計領域。在目標體系結構的邏輯設計和電路設計之前,通過對目標體系結構進行系統模擬,設計者不僅可以初步的評測目標系統的性能,判斷系統性能是否達到設計上的要求,而且還可以針對設計的關鍵要求選擇有針對性的方案。 本文詳細闡述了數據流多核模擬器的設計與實現。該模擬器為基線模型,采用執行驅動技術,可運行用戶級應用程序,具有軟件結構模塊化、參數可配置、數據統計功能全面等特點。 首先根據數據流多核模擬器的設計目的和需求分析,選擇了模擬技術方案,然后描述了模擬器的總體結構和功能模塊劃分,接下來分兩個方面論述了模擬器的設計與實現： (1)指令集仿真。該部分主要介紹了指令的定義與解碼和系統調用處理。其中,系統調用的實現方式采用宿主機代理。 (2)數據流多核模擬器功能模塊的設計與實現。該部分主要討論了模擬器總體設計思想、模塊劃分和模擬技術方案選擇。模擬器一共包含6個模塊,分別為執行區模塊、互聯網絡模塊、存儲器模塊、消息模塊、輔助功能模塊和模擬器模塊。 本文最后對模擬器的正確性進行了測試和數據分析。
[Abstract]:Computer system simulation is very important to the design of modern computer system, especially in the field of processor design. Before the logical design and circuit design of the target architecture, the designer can not only evaluate the performance of the target system, but also judge the performance of the system, and judge the performance of the system. In addition, we can also select targeted solutions for key design requirements.
In this paper, the design and implementation of a data flow multi core simulator are described in detail. The simulator is a baseline model, uses execution drive technology, and can run user level applications. It has the characteristics of modularization of software structure, configuration of parameters, and comprehensive data statistics function.
Firstly, based on the design purpose and requirement analysis of the data flow multi core simulator, the simulation technology scheme is selected. Then the overall structure and function module division of the simulator are described. Then the design and implementation of the simulator are discussed in two aspects.
(1) instruction set simulation. This part mainly introduces the definition and decoding of instructions, and the processing of system calls, in which the system calls are implemented by host agent.
(2) the design and implementation of the function module of the data flow multi core simulator. This part mainly discusses the overall design idea of the simulator, the module division and the selection of the simulation technical scheme. The simulator contains 6 modules, which are the executive area module, the interconnected network module, the memory module, the message module, the auxiliary function module and the simulator module.
Finally, the correctness of the simulator is tested and analyzed.
【學位授予單位】：北京郵電大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TP368.12;TP391.9

【參考文獻】

相關期刊論文 前1條

1 吉利久;SoC的技術支持及嵌入式系統設計[J];單片機與嵌入式系統應用;2001年10期

，

本文編號：2016119