發布時間：2018-07-12 18:15

  本文選題：六桿機構 + Dyad機構�。� 參考：《延邊大學》2011年碩士論文

【摘要】：機構是力和運動的傳遞和生成的機械裝置,現在以多種形態大量應用于生產現場。本文所研究的六桿機構是為了使四桿機構可以在平面上做最短路徑的往復運動,在四桿機構驅動桿上設計Dyad (Crank-rocker機構)的裝置。這種六桿機構以多種設計形式廣泛應用于生產現場。隨著自動化產業的發展,運用電動馬達和機構來完成生產現場裝配已經成為一個重要的研究方向。 本文對經過預定三位置的六桿機構設計方法及六桿機構轉動時出現的幾點問題(順序問題、轉移問題)的解決方法進行了研究,基于以上的研究結果,設計研發了經過預定三位置的四、六桿機構設計模擬軟件(windows用)。主要研究內容如下： 首先,對基于三位置的四桿機構進行了綜合分析,并進行了相關研究：(1)已知被驅動桿上轉動點位置坐標時,計算固定點的位置坐標；(2)已知被驅動桿上固定點位置坐標時,計算轉動點的位置坐標；(3)通過數學公式推導,計算出Pole和image pole位置的坐標；(4)在轉動點運動區域,通過菲萊蒙結構,計算出被驅動桿轉動點不可以選擇的區域,從而解決轉移問題；(5)在固定點運動區域,通過菲萊蒙結構,計算出被驅動桿固定點不可以選擇的區域,從而解決轉移問題；(6)通過數學公式推導,計算出轉動點作直線運動的條件。 其次,對Dyad機構(Crank-rocker機構)進行了綜合分析。(1)在被驅動桿上連接Dyad機構,使四桿機構可以在平面上做最短路徑的往復運動,這就要求Dyad機構必須保證曲柄的存在。本文運用著名的格拉斯霍夫準則(Grashof type)計算出Dyad機構的曲柄存在的條件；(2)設計Dyad機構時,轉移問題的解決方法。 最后,以C++、MFC、OpenGL為編輯語言,設計研發經過預定三位置的四、六桿機構設計模擬軟件,實現圖形建模、參數設定、可視化仿真。
[Abstract]:The mechanism is a mechanical device for the transmission and generation of force and motion, and is now widely used in production sites in a variety of forms. In this paper, the six-bar mechanism is designed to make the four-bar mechanism perform the reciprocating motion of the shortest path on the plane, and the device of Dyad (Crank-rocker mechanism) is designed on the driving rod of the four-bar mechanism. This six-bar mechanism is widely used in production site with various design forms. With the development of automation industry, it has become an important research direction to use electric motor and mechanism to complete production site assembly. In this paper, the design method of six-bar mechanism with predetermined three positions and the solutions of several problems (order problem, transfer problem) that appear when the six-bar mechanism rotates are studied. Based on the above research results, Design and development of four and six bar mechanism design simulation software (windows) after a predetermined three position. The main research contents are as follows: firstly, the four-bar mechanism based on three positions is synthetically analyzed, and related studies are carried out: (1) when the position coordinates of the rotation point on the driven rod are known, the position coordinates of the fixed points are calculated; (2) when the position coordinates of fixed points on the driven rod are known, the position coordinates of rotation points are calculated; (3) the coordinates of Pole and image pole positions are derived by mathematical formula; (4) the coordinates of pole and image pole positions are calculated through the Filemon structure in the moving region of the point of rotation. In order to solve the problem of transfer, the region that can not be selected by driving rod rotation point can be calculated by Filemon structure, and the problem of transfer can be solved by calculating the region that can not be selected by driving rod rotation point. (5) in the moving region of fixed point, the region that can not be selected by driving rod fixed point can be calculated by Filemon structure. (6) by deducing the mathematical formula, the conditions for the rotation point to move in a straight line are calculated. Secondly, the comprehensive analysis of Dyad mechanism (Crank-rocker mechanism) is carried out. (1) connecting Dyad mechanism on the driven rod, the four-bar mechanism can make the reciprocating motion of the shortest path on the plane, which requires the existence of crank in Dyad mechanism. In this paper, the existence conditions of the crank of Dyad mechanism are calculated by using the famous Grashof type criterion. (2) the solution of the transfer problem in the design of the Dyad mechanism. Finally, using C / MFCU OpenGL as editing language, the software of design simulation of four-and-six-bar mechanism is designed and developed, which can realize graphic modeling, parameter setting and visual simulation.
【學位授予單位】：延邊大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH112.1

【相似文獻】

相關期刊論文 前10條

1 鄧利民;;復雜顎式破碎機的結構改進[J];科學之友;2011年13期

2 趙連生;;《機械原理》中四桿機構的運動分析[J];常熟理工學院學報;2011年06期

3 金德聞;張濟川;廖金聲;張曉雪;;四桿機構運動彈性動力學實驗臺[J];實驗技術與管理;1991年05期

4 白v，

本文編號：2118058