發布時間：2018-07-13 21:32

【摘要】：針對應用多作用定子導軌結構的徑向柱塞泵,通過對柱塞副在等加速運動規律定子曲線下的動力學分析,研究了不同幅角分配方案對泵性能的影響。研究結果表明:定子曲線的幅角分配對度加速度、度速度、壓力角、缸體受力、接觸應力等性能有很大的影響,且幅角分配不對稱系數約等于2,等速區幅角值是等加速區幅角值的0.9~1倍時,泵的綜合性能相對最佳;吸排油過程中油液速率的許用值和接觸應力的最大值分別可以作為等速區和等減速區幅角設計的參考基準之一。
[Abstract]:Aiming at the radial piston pump with multi-action stator guideway structure, the effect of different amplitude and angle distribution schemes on the pump performance is studied through the dynamic analysis of the piston pair under the stator curve of the law of equal acceleration motion. The results show that the distribution of amplitude angle of the stator curve has great influence on the performance of degree acceleration, degree velocity, pressure angle, cylinder block force, contact stress, etc. When the asymmetry coefficient of amplitude and angle distribution is about 2 and the amplitude angle of isokinetic zone is 0.9 times of that of equal acceleration zone, the comprehensive performance of pump is relatively best. The allowable value of oil flow rate and the maximum contact stress can be used as one of the reference datum for the amplitude and angle design of the isokinetic region and the equal deceleration zone respectively.
【作者單位】： 蘭州理工大學能源與動力工程學院;蘭州理工大學溫州泵閥工程研究院;甘肅電投大容電力有限責任公司;
【基金】：溫州市科技特派員專項(2014F002)
【分類號】：TH322
，

本文編號：2120801