發布時間：2018-08-11 12:31

【摘要】：論文涉及的液壓平衡閥是一個集成閥體,是修磨臺車驅動液壓系統關鍵部件之一。文中系統分析了平衡閥使用的設備概況和液壓驅動系統。 本文對平衡閥的工作原理進行了較透徹的剖析,通過對損壞閥體的解體測繪,仔細探究了平衡閥的技術特點、損壞的原因和開發的技術難點,并根據國內具體條件,提出平衡閥開發的整體技術改進方案,制作零部件,進行裝配,為方便安裝,新開發的制動閥其接口尺寸和外形尺寸按原閥尺寸保持不變,外部結構保持不變各閥件只做內部結構調整,從而滿足實際生產的需要。 為了不影響平衡閥的工作特性,對此平衡閥的動態特性做一些定性的仿真研究,保證改造后的平衡閥的動、靜態特性,通過仿真驗證數學模型的正確性及平衡閥優化設計方案的可行性,并為現場的正常使用提供初步的理論依據。 根據現場生產節奏,合理安排上機時間,并和現場人員對投入試用的平衡閥系統進行觀測和數據收集,經過數據處理和仿真結果進行比較,得出結論。
[Abstract]:The hydraulic balance valve is an integrated valve body, which is one of the key components of the hydraulic system driven by the grinder. The general situation of the equipment and the hydraulic drive system of the balance valve are analyzed systematically in this paper. In this paper, the working principle of the balance valve is thoroughly analyzed, and through the disassembly mapping of the damaged valve body, the technical characteristics, the causes of the damage and the technical difficulties of the development of the balance valve are carefully explored, and according to the domestic specific conditions, The integral technical improvement scheme of balance valve development is put forward, parts and components are made and assembled. In order to facilitate installation, the newly developed brake valve's interface size and shape size remain unchanged according to the original valve size. The external structure remains the same. The valves only adjust the internal structure to meet the actual production needs. In order not to affect the working characteristics of the balance valve, some qualitative simulation studies on the dynamic characteristics of the balance valve are made to ensure the dynamic and static characteristics of the modified balance valve. The correctness of the mathematical model and the feasibility of the optimal design of the balance valve are verified by simulation, and the preliminary theoretical basis for the normal use of the field is provided. According to the production rhythm of the site, reasonable arrangement of the time to start the machine, and field personnel to the balance valve system put into trial observation and data collection, after data processing and simulation results are compared, draw a conclusion.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH134

【參考文獻】

相關期刊論文 前6條

1 聶春燕;MATLAB/SIMULINK在動態系統仿真中的應用[J];長春大學學報;2001年01期

2 P.Righini;M.Cattarossi;;高產量的鋼坯檢驗及修磨生產線[J];鋼鐵;2006年02期

3 徐廣鋒,邢繼志 ,石景林;全動力液壓制動系統常見故障的排除[J];工程機械與維修;2002年11期

4 張曉舟;劉民良;;工程機械液壓制動系統故障分析與排除[J];民營科技;2007年07期

5 許賢良;液壓技術回顧和展望[J];液壓氣動與密封;2002年03期

6 楊爾莊;二十一世紀液壓技術現狀及發展趨勢(續)[J];液壓與氣動;2001年06期

，

本文編號：2176999