發布時間：2018-05-19 05:57

  本文選題：擦玻璃機器人 + 履帶驅動　； 參考：《真空科學與技術學報》2017年04期

【摘要】：針對負壓吸附式擦玻璃機器人(WCR),提出在泄漏條件下的負壓腔(NPC)流體模型建立方法,并進行仿真分析和實驗驗證。對擦玻璃機器人進行靜力學分析,得到機器人安全吸附在玻璃表面的負壓值;由于負壓腔與玻璃之間存在氣隙,建立泄漏條件下的負壓腔流體模型,將負壓系統簡化為RC等效電路,負壓響應特性為慣性環節。最后對負壓腔流體模型進行計算流體力學仿真,通過實驗測定負壓腔的壓力分布,驗證了負壓腔流體模型的準確性。通過提出一種負壓系統分析方法,為采用負壓吸附方式的擦玻璃機器人提供了設計依據。
[Abstract]:In view of the negative pressure adsorption glass erasing robot (WCRC), a method for establishing the fluid model of the negative pressure cavity (NPC) under the condition of leakage is proposed, and the simulation analysis and experimental verification are carried out. Through static analysis of glass erasing robot, the negative pressure value of the robot safely adsorbed on the glass surface is obtained. Because of the air gap between the negative pressure chamber and the glass, the fluid model of the negative pressure chamber under the condition of leakage is established. The negative pressure system is simplified as RC equivalent circuit and the negative pressure response characteristic is inertial link. Finally, the computational fluid dynamics simulation of the negative pressure chamber fluid model is carried out, and the pressure distribution of the negative pressure chamber is measured by experiments, which verifies the accuracy of the negative pressure chamber fluid model. A negative pressure system analysis method is proposed, which provides a basis for the design of glass erasing robot with negative pressure adsorption.
【作者單位】： 河北工業大學機械工程學院;
【基金】：機器人學國家重點實驗室基金課題(401385)
【分類號】：TP242

【相似文獻】

相關期刊論文 前1條

1 楊海龍;王詩文;季子夫;王鐵男;宋凱;;擦玻璃機械手的方案設計分析[J];價值工程;2014年08期

，

本文編號：1908971