發布時間：2018-06-15 02:15

  本文選題：振動傳感器 + 振動臺��； 參考：《測控技術》2016年12期

【摘要】：為測試某型飛機振動傳感器性能,采用背靠背比較法振動測試方法,基于蘇試振動臺(VT-500)、功率放大器(LA-800)、單軸向電荷輸出型加速度標準傳感器(Ymc222A25)、電荷放大器(Ymc8102T)、普源信號發生器(DG1032Z)以及研華PCI工控機與A/D板卡(PCI-1716L),搭建振動傳感器試驗器振動測試平臺,以DG1032Z輸出作為振動激勵信號源,基于VC++6.0開發出信號發生器遠程控制與板卡信號采集軟件,對試驗器的功能進行試驗驗證,結果表明其有效性。所研制的試驗器可實現振動信號源的產生與標準/被測信號的校準,從而為某型飛機振動傳感器的測試與修理提供技術支撐。
[Abstract]:In order to test the performance of a certain aircraft vibration sensor, a back to back comparison method is used to test the vibration. Based on the Soviet-test vibration table VT-500, the power amplifier LA-800, the uniaxial charge output acceleration standard sensor Ymc222A25, the charge amplifier Ymc8102T, the general source signal generator DG1032Z), and the ICA PCI industrial control computer and the ArD board card PCI-1716L, the vibration testing platform of the vibration sensor tester is built. Using DG1032Z output as vibration excitation signal source, a signal generator remote control and board signal acquisition software is developed based on VC 6.0. The function of the tester is tested and verified, and the results show that it is effective. The developed tester can generate the vibration signal source and calibrate the standard / measured signal, thus providing technical support for the test and repair of the vibration sensor of a certain aircraft.
【作者單位】： 南京航空航天大學自動化學院;中國人民解放軍第5720工廠;揚州英邁克測控技術有限公司;
【分類號】：V216.8;TP212

【相似文獻】

相關期刊論文 前3條

1 蔡二雨;振動傳感器隨機校準技術達到國際先進水平[J];航空計測技術;1994年01期

2 高金芳,楊曉偉,姜東升;振動傳感器的微加速度動態校準[J];宇航計測技術;2000年02期

3 ;[J];;年期

，

本文編號：2020107