電磁監測試驗衛星高能粒子探測器低能段載荷數采系統的設計與實現
本文選題:電磁監測試驗衛星 + 高能粒子探測器; 參考:《南昌航空大學》2017年碩士論文
【摘要】:電磁監測試驗衛星(代號ZH-1)是要建立一個監測全球空間電磁場、電磁波、電離層等離子體、高能粒子等物理量的空間試驗平臺。它利用這些平臺監測數據,識別大地震發生前相關的電磁、電離層和高能粒子異常,為探索地震前兆信息、空間環境監測預報和地球系統科學研究提供新的技術手段,為未來建立電磁監測衛星業務化系統進行技術準備。高能粒子探測器是電磁監測試驗衛星的有效載荷之一。ZH-1衛星高能粒子探測器(HEPP)由低能段載荷(HEPP-L)、高能段載荷(HEPP-H)和太陽X射線監測器(HEPP-X)組成。高能粒子探測器的目的是實現對高能帶電粒子的入射方向和能量的測量,配合空間電磁測量,尋找空間高能粒子通量變化與地震引起的電磁輻射的可能關聯。HEPP-L數據采集系統是高能粒子探測器重要的組成部分。它是通過電纜與數據管理系統相連接,它需要對低能段質子和電子產生的事例進行采集、轉換和處理,并把處理好的數據發送給數據管理系統,同時它需要對高壓、電流和溫度等進行監測,然后把監測的數據發送給數據管理系統,并且它需要執行數據管理系統發送過來的指令。本文主要介紹了HEPP-L數采系統的設計與實現,主要包括:1.在探測器設計部分,主要針對硅片探測器和反符合探測器的結構、功能和相關指標進行闡述;2.在硬件設計部分,完成了系統各功能模塊的劃分,針對這些功能模塊,詳述了各功能模塊的原理以及每款芯片的功能和性能;3.在軟件設計部分,先介紹了軟件的功能需求、性能需求和可靠性需求,然后針對這些需求完成了軟件各功能模塊的劃分并且詳細介紹了各功能模塊的設計;4.在系統測試部分,主要對硬件和軟件進行測試,硬件測試主要是對4塊電路板功能模塊和性能要求進行測試,軟件部分主要是對該FPGA軟件主要實現的3個功能進行測試。
[Abstract]:The electromagnetic monitoring test satellite (code ZH-1) is to establish a space test platform for monitoring the physical quantities of electromagnetic field, electromagnetic wave, ionospheric plasma, high-energy particle and so on in the global space. It uses these platform monitoring data to identify the electromagnetic, ionospheric and high-energy particle anomalies associated with major earthquakes, providing new technical means for exploring seismic precursor information, space environment monitoring and prediction and Earth system scientific research. Technical preparation for the future establishment of electromagnetic monitoring satellite operational system. High energy particle detector is one of the payloads of electromagnetic monitoring test satellite. ZH-1 satellite high energy particle detector (HEPP) is composed of low energy segment load (HEPP-L), high energy segment load (HEPP-H) and solar X-ray monitor (HEPP-X). The purpose of the high-energy particle detector is to realize the measurement of the incident direction and energy of the high-energy charged particle, and to combine with the space electromagnetic measurement. The HEPP-L data acquisition system is an important part of the high energy particle detector. It is connected to the data management system through the cable, it needs to collect, convert and process the low energy proton and electron generation, and send the processed data to the data management system, at the same time, it needs the high voltage. Current and temperature are monitored, and then the monitored data is sent to the data management system, and it needs to execute the instructions sent by the data management system. This paper mainly introduces the design and implementation of HEPP-L data acquisition system, including: 1. In the part of detector design, the structure, function and related index of silicon wafer detector and anti-coincidence detector are expounded. In the part of hardware design, the partition of each functional module of the system is completed, and the principle of each functional module and the function and performance of each chip are described in detail for these functional modules. In the part of software design, the functional requirements, performance requirements and reliability requirements of the software are introduced, and then the functional modules of the software are divided and the design of each functional module is introduced in detail. In the part of system testing, the hardware and software are mainly tested. The hardware test is mainly to test the functional modules and performance requirements of four circuit boards, and the software part is mainly to test the three main functions of the FPGA software.
【學位授予單位】:南昌航空大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:P315.7;TP274.2
【相似文獻】
相關期刊論文 前10條
1 Joseph S.Duval;James A.Pitkin;范宴良;;用于航空γ—射線能譜測量大體積塑料探測器的試驗研究[J];國外地質勘探技術;1983年09期
2 杜遠才;高能探測器的發展狀況[J];物理;1974年01期
3 程實平,嚴義塤,張鳳山,,許步云,朱翠媛;3通道短波紅外光譜可識別列陣探測器的研制[J];紅外與毫米波學報;1994年06期
4 譚中奇;龍興武;張斌;;探測器的響應特性及對連續波腔衰蕩技術測量的影響[J];中國激光;2009年04期
5 J.G.Timothg ,汪金祥;多陽極微通道列陣探測器系統的性能特征[J];高速攝影與光子學;1986年03期
6 高德喜;沈海倫;孫復生;張毓敏;馬呈德;;流線型高純鍺探測器的研制[J];中國原子能科學研究院年報;1989年00期
7 宋延嵩;佟首峰;董巖;趙馨;;基于現場可編程門陣列單探測器復合軸控制技術[J];光子學報;2014年04期
8 齊卉莖,方雄,梁偉,徐四大,陳迎棠,陳澤民;位置靈敏α探測器[J];核電子學與探測技術;1996年05期
9 戴貴亮;高能物理實驗數據的獲取和處理[J];自然雜志;1981年11期
10 張建華;張傳飛;彭太平;王振通;唐登攀;周剛;;裂變伽馬射線探測器的時間響應特性研究[J];核電子學與探測技術;2010年09期
相關會議論文 前10條
1 譚繼廉;靳根明;吳和宇;張金霞;鮑志勤;李存藩;王柱生;李祖玉;王素芳;段利敏;肖志剛;王宏偉;胡佩剛;盧子偉;鳳瑩;許金蘭;江棟興;華輝;錢濤;李相慶;;用于首次放射性束物理實驗的探測器系統[A];第9屆全國核電子學與核探測技術學術年會論文集[C];1998年
2 王柱生;晁致遠;許金蘭;;金硅面壘~8Be探測器的研制[A];第7屆全國核電子學與核探測技術學術年會論文集(一)[C];1994年
3 張磊;韓裕生;王峰;;紅外標準傳遞探測器研究[A];2007年紅外探測器及其在系統中的應用學術交流會論文集[C];2007年
4 譚繼廉;王小兵;靳根明;張金霞;盧子偉;吳和宇;鮑志勤;李存t
本文編號:1881549
本文鏈接:http://www.wukwdryxk.cn/shoufeilunwen/benkebiyelunwen/1881549.html