發布時間：2018-07-01 17:32

  本文選題：人工胸廓模型 + 椎間盤��； 參考：《天津理工大學》2015年碩士論文

【摘要】：漏斗胸合并脊柱側彎是一種先天性疾病,其病癥為胸骨體向內凹陷且伴有脊柱側彎癥狀,該疾病會導致前胸下部成漏斗狀,對心臟產生壓迫,影響患者的心肺功能,同時對患者的心理產生不良的影響。因?yàn)槊つ砍C形可能會加重脊柱側彎,臨床上醫生只能被迫放棄手術。目前漏斗胸合并脊柱側彎矯形過程的研究多數依靠數值模擬,數值模擬的優點是進行參數研究方便,但也有一定的局限性,數值模擬的準確性需要通過實驗進行驗證。受倫理限制,目前無法通過在體的電測試驗獲得矯形過程中胸廓骨骼的應變分布規律,同時因?yàn)闊o法獲得漏斗胸合并脊柱側彎的尸體標本也無法進行尸體的電測試驗。數值計算結果可以通過動物試驗和人工胸廓模型試驗進行驗證,考慮到動物胸廓模型的的長軸位于矢狀面與人體胸廓模型長軸位于冠狀面不同,本文采用人工胸廓模型進行電測試驗。胸廓模型的制作實踐顯示,制作漏斗胸合并脊柱側彎的胸廓模型十分復雜,不僅進行3D打印的價格昂貴,而且3D打印的材料與骨骼材料的材料參數差別較大。作者采用高分子材料制作一個正常的人工胸廓模型,對人工胸廓模型進行生理載荷作用下的電測實驗,并對實驗結果進行了數值模擬,比較了與實驗結果的誤差。人工胸廓模型包括2塊胸骨、12塊胸椎及12對肋骨,通過連接件連接了胸骨,肋骨和胸椎。實驗中運用電子萬能試驗機對人工胸廓模型施加生理載荷,并運用靜態應變測量系統測出人工胸廓模型在生理載荷作用下各部位的應變,主要測量胸骨、肋軟骨、肋骨近端和肋骨遠端部位的應變。其中實驗方案的設計和測點布置參考了數值計算結果。為了與實驗結果進行比較,實驗前對人工胸廓模型進行CT掃描,然后運用Mimics和Geomagic studio軟件重建了人工胸廓的三維模型,導入有限元分析軟件ABAQUS6.11中進行人工胸廓模型在生理載荷作用下的數值模擬仿真分析,主要分析人工胸廓模型在生理載荷作用下的位移場、應力應變場。參數研究主要考慮了兩種因素,一是研究了肋軟骨對人工胸廓模型在生理載荷作用下的位移場和應力應變場的影響,二是在胸椎之間創建了椎間盤,研究了椎間盤對人工胸廓模型在生理載荷作用下的位移場和應力應變場的影響。最后對人工胸廓模型在生理載荷作用下的實驗結果與數值模擬結果進行了對比,分析了影響誤差的因素。文中結果對于指導漏斗胸合并脊柱側彎矯形過程的數值模擬和進行胸廓模型的電測試驗研究有參考價值。
[Abstract]:Funnelal chest combined with scoliosis is a congenital disease characterized by an inward depression of the sternum and symptoms of scoliosis, which can lead to a funnel-shaped lower anterior chest, oppress the heart, affect the heart and lung function of the patient, and have a bad effect on the patient's psychology, because blind orthopedics may aggravate the scoliosis. Clinical doctors can only be forced to give up surgery. Currently, most studies on the funnel chest and scoliosis orthopedic process rely on numerical simulation. The advantage of the numerical simulation is that it is convenient to study the parameters, but also has some limitations. The accuracy of the numerical simulation needs to be verified through experiments. The test obtained the strain distribution of the thoracic skeleton in the orthopedic process, and the body test could not be carried out because the corpse of the funnel chest and the scoliosis was not available. The numerical results can be verified by animal test and artificial chest model test, considering the long axis of the animal's chest model is located in the vector. In this paper, an artificial thoracic model is used for electrical test. The production practice of the thoracic model shows that the thoracic model of the funnel chest combined with scoliosis is very complex, not only is the price of 3D printing is expensive, but the material parameters of the material of 3D and the material of the bone are more different than that of the bone material. The author made a normal artificial thoracic model with polymer material, and carried out the electrical test under physiological load on the artificial thoracic model. The experimental results were simulated and the error was compared with the experimental results. The artificial thoracic model consisted of 2 sternum, 12 thoracic vertebrae and 12 pairs of ribs, and the chest was connected to the chest by connecting parts. Bone, rib and thoracic vertebrae. In the experiment, physiological load was applied to artificial thoracic model by electronic universal testing machine, and the strain of artificial thoracic model under physiological load was measured by static strain measurement system. The strain of sternum, costal cartilage, proximal rib and distal rib of rib bone were measured. The design of experimental scheme and the design of the experimental scheme In order to compare the numerical results with the experimental results, in order to compare the experimental results with the experimental results, the artificial chest model is scanned by CT before the experiment. Then the 3D model of the artificial chest profile is reconstructed by Mimics and Geomagic Studio software, and the numerical model of the human chest profile model under the physiological load is carried out in the finite element analysis software ABAQUS6. 11. Simulation analysis, mainly analyze the displacement field of artificial thoracic model under physiological load, stress and strain field. Two factors are considered in the study of parameters. One is the study of the effect of rib cartilage on the displacement field and stress and strain field of artificial thoracic model under physiological load, and the two is to create the intervertebral disc between the thoracic vertebrae. The effect of the intervertebral disc on the displacement field and the stress and strain field of the artificial thoracic model under the physiological load. Finally, the experimental results of the artificial thoracic model under the physiological load are compared with the numerical simulation results, and the factors affecting the error are analyzed. The results are used to guide the number of the funnel chest combined with the spinal scoliosis. It has reference value for simulating and conducting the electrical test of the chest model.
【學位授予單位】：天津理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：R318.1

【參考文獻】

相關期刊論文 前9條

1 付偉;張海;;基于Geomagic Studio軟件的逆向工程設計[J];工具技術;2007年11期

2 郭永成;王永堂;申毅;石建偉;孟二超;尚盈輝;;微創漏斗胸矯形鋼板的技術改進[J];河南外科學雜志;2011年05期

3 劉文亮;喻風雷;尹邦良;;電視胸腔鏡輔助NUSS手術微創治療漏斗胸[J];中南大學學報(醫學版);2008年05期

4 王文東;史儀凱;尹麗娜;楊碩;;幼兒漏斗胸三維可視化建模方法研究[J];計算機仿真;2010年09期

5 胡影峰;;Geomagic Studio軟件在逆向工程后處理中的應用[J];制造業自動化;2009年09期

6 劉吉福;葉金鐸;徐波;王樹壽;武珊珊;;微創矯治漏斗胸后時間延展胸廓骨重塑的臨床研究[J];生物醫學工程與臨床;2011年06期

7 張輔賢;單根法;鐘z，

本文編號：2088537