Mallinckrodt高壓注射器故障維修一例
發布時間：2018-08-19 16:23
【摘要】：正故障現象高壓注射器型號Angiomat IIIumena,開機后放入針筒,關上注射筒門并推動加注控制條排氣,設置參數準備注射,Configuration屏幕上出現提示:injector disabled,faceplate open,press main screen key to continue。注射頭屏幕見圖1。按[MAIN SCREEN]鍵重新開始啟動過程,故障依然如前,注射失敗。
[Abstract]:Positive fault high pressure syringe model Angiomat IIIumena, put into the syringe after boot, close the injection tube door and push the injection control strip exhaust, set the parameters to prepare the injection configuration screen with the prompt: injector disabled plate openplate press main screen key to continue. The injection head screen is shown in figure 1. Press the [MAIN SCREEN] button to restart the process, the fault is still as before, injection failed.
【作者單位】： 廣西柳州市人民醫院;
【分類號】：R197.39
，
本文編號：2192190
[Abstract]:Positive fault high pressure syringe model Angiomat IIIumena, put into the syringe after boot, close the injection tube door and push the injection control strip exhaust, set the parameters to prepare the injection configuration screen with the prompt: injector disabled plate openplate press main screen key to continue. The injection head screen is shown in figure 1. Press the [MAIN SCREEN] button to restart the process, the fault is still as before, injection failed.
【作者單位】： 廣西柳州市人民醫院;
【分類號】：R197.39
，
本文編號：2192190
本文鏈接：http://www.wukwdryxk.cn/yixuelunwen/swyx/2192190.html
最近更新
教材專著
