發布時間：2018-07-15 07:33

【摘要】：目的：制備西他沙星注射劑，并對其進行制劑學、安全性及藥物動力學評價。 方法：(1)建立高效液相色譜法測定西他沙星注射劑中的藥物含量及其有關物質，用來評價制備工藝。(2)西他沙星注射劑的處方設計前研究。(3)進行西他沙星注射劑的處方篩選及工藝探索。(4)通過溶血性、過敏反應、血管、肌肉刺激性試驗和熱原檢查對西他沙星注射劑進行初步安全性評價。(5)選用司帕沙星為內標物，建立高效液相色譜法測定大鼠體內西他沙星的含量變化，，初步研究其在大鼠體內藥動學特征。 結果：(1)采用HPLC法測定制劑中西他沙星及有關物質的含量，該法快速、靈敏、穩定可靠。(2)西他沙星易溶于酸性水溶液，在高溫條件下穩定性良好；對酸、堿、高濕及光照條件敏感，該藥物的最穩定pH約為4~6之間。(3)以乳酸為pH調節劑，氯化鈉為等滲調節劑成功制備了西他沙星注射劑。制劑工藝為采用0.03%活性炭于煮沸條件下處理30min，滅菌條件為115℃滅菌30min。(4)注射劑經過影響因素、加速、長期試驗各指標均符合規定，制劑質量穩定。(5)安全性評價表明，制備的西他沙星注射劑溶血性、過敏反應、血管及肌肉刺激性和熱原檢查均顯陰性。(6)西他沙星注射劑大鼠體內藥動學研究表明，藥物在大鼠體內t1/2為0.857h，平均滯留時間(MRT)為0.996h，表觀分布容積為4.140L·kg-1。 結論：成功建立了西他沙星注射劑的制備方法，并得到良好的初步穩定性及安全性評價結果。西他沙星注射劑的大鼠體內藥動學研究結果為進一步研發奠定了良好的基礎。
[Abstract]:Objective: to prepare cilafloxacin injection and evaluate its pharmacokinetics and safety. Methods: (1) to establish a high performance liquid chromatography (HPLC) method for the determination of cetafloxacin injection and its related substances. It was used to evaluate the preparation process. (2) Pre-design study on the formulation of cilafloxacin injection. (3) screening of the formulation of cilastacin injection and exploration of the technology. (4) by hemolytic, allergic reaction, blood vessel, blood vessel, Muscle irritation test and pyrogen test were used to evaluate the safety of cisfloxacin injection. (5) using sparfloxacin as internal standard, a high performance liquid chromatography (HPLC) method was established for the determination of cetafloxacin in rats. The pharmacokinetic characteristics in rats were preliminarily studied. Results: (1) the HPLC method was used to determine the content of estracin and its related substances. The method was rapid, sensitive, stable and reliable. (2) ciltafloxacin was easily soluble in acidic aqueous solution and had good stability at high temperature. The most stable pH of the drug was about 4 ~ 6. (3) Cetafloxacin injection was successfully prepared with lactic acid as pH regulator and sodium chloride as isoosmotic regulator. The preparation process was treated with 0.03% activated carbon for 30 min under boiling condition, and sterilizing condition was 115 鈩

本文編號：2123333