A公司產品開發項目管理研究
發布時間：2018-12-08 18:05
【摘要】：中小企業創造了國家經濟的大部分財富,中小企業雖然是國民經濟的主角,但是和大企業相比,存在資源不足,管理水平落后,人員流動頻繁等困難,直接影響了中小企業的生存和發展。對于大多數中小企業來說,持續創新成為了企業在市場競爭環境中生存的策略,新產品開發是最常見的創新手段。由于管理手段的落后和資源有限,往往使新產品開發工作增加了風險和困難,甚至使項目失敗。越來越多的中小企業意識到,在提高產品研發技術的同時,還要建立適合本企業的產品開發管理制度,提高產品開發工作的效率。 本文以一個典型的小企業的產品開發為研究對象,對其新產品開發過程中存在的主要問題進行研究,這些問題包括新項目確定和選擇,設計變更與修改,安規測試失敗,工藝文件編制不完善和開發流程有待優化。這些問題容易造成項目進度延誤,費用超支。利用因果圖分析問題產生的原因,利用ASME分析開發工作中的非增值活動和非增值活動,對產品開發的流程進行優化。使用并行工程的思想,在設計團隊中增加工藝設計人員,使工藝設計與產品設計同時進行。讓供應商早期開始介入?yún)⑴c設計,利用供應商的信息渠道獲得設計工作所需的資料。用作業成本法計算結果評估改進措施的成果。 對于查找和解決產品開發管理中存在的問題,本文的工作是一次探索,可為中小企業在解決類似問題時提供一些思路和方法。
[Abstract]:Small and medium-sized enterprises have created most of the wealth of the national economy. Although small and medium-sized enterprises are the protagonists of the national economy, compared with large enterprises, they have difficulties such as insufficient resources, backward management levels, frequent staff movements, and so on. Directly affected the survival and development of small and medium enterprises. For the majority of small and medium-sized enterprises, continuous innovation has become a strategy for enterprises to survive in the market competition environment, and new product development is the most common means of innovation. Because of the backwardness of management means and limited resources, the new product development work often increases the risk and difficulty, and even makes the project fail. More and more small and medium-sized enterprises realize that while improving the technology of product research and development, they should establish a product development management system suitable for their own enterprises, and improve the efficiency of product development. In this paper, a typical small enterprise product development as the research object, the main problems in the process of new product development are studied. These problems include new project determination and selection, design change and modification, safety test failure. Process documentation is not perfect and the development process needs to be optimized. These problems easily lead to project schedule delays and cost overruns. The cause and effect of the problem are analyzed by using causality diagram, and the process of product development is optimized by using ASME to analyze the non-value-added activities and non-value-added activities in the development work. By using concurrent engineering, process designers are added to the design team so that process planning and product design can be carried out at the same time. Let the supplier get involved in the design at an early stage, using the supplier's information channel to obtain the information needed for the design work. Evaluate the results of the improvement measures with the results of ABC calculation. To find and solve the problems existing in product development and management, the work of this paper is an exploration, which can provide some ideas and methods for small and medium-sized enterprises to solve similar problems.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB472
本文編號：2368772
[Abstract]:Small and medium-sized enterprises have created most of the wealth of the national economy. Although small and medium-sized enterprises are the protagonists of the national economy, compared with large enterprises, they have difficulties such as insufficient resources, backward management levels, frequent staff movements, and so on. Directly affected the survival and development of small and medium enterprises. For the majority of small and medium-sized enterprises, continuous innovation has become a strategy for enterprises to survive in the market competition environment, and new product development is the most common means of innovation. Because of the backwardness of management means and limited resources, the new product development work often increases the risk and difficulty, and even makes the project fail. More and more small and medium-sized enterprises realize that while improving the technology of product research and development, they should establish a product development management system suitable for their own enterprises, and improve the efficiency of product development. In this paper, a typical small enterprise product development as the research object, the main problems in the process of new product development are studied. These problems include new project determination and selection, design change and modification, safety test failure. Process documentation is not perfect and the development process needs to be optimized. These problems easily lead to project schedule delays and cost overruns. The cause and effect of the problem are analyzed by using causality diagram, and the process of product development is optimized by using ASME to analyze the non-value-added activities and non-value-added activities in the development work. By using concurrent engineering, process designers are added to the design team so that process planning and product design can be carried out at the same time. Let the supplier get involved in the design at an early stage, using the supplier's information channel to obtain the information needed for the design work. Evaluate the results of the improvement measures with the results of ABC calculation. To find and solve the problems existing in product development and management, the work of this paper is an exploration, which can provide some ideas and methods for small and medium-sized enterprises to solve similar problems.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB472
【參考文獻】
相關期刊論文 前10條
1 郭毅飛;;我國中小企業現狀分析[J];東方企業文化;2010年02期
2 費志敏;毛春苗;;先進生產方式下的產品開發[J];華東經濟管理;2011年08期
3 王哲,于渤,徐殿國;新產品開發項目的有效決策[J];哈爾濱理工大學學報;2004年01期
4 許雋,楊東超,李姝寧,陳懇;面向企業產品開發的協同項目管理技術研究[J];機械設計與制造;2004年04期
5 張宇;朱方偉;;基于關鍵鏈的項目進度管理方法研究[J];價值工程;2009年12期
6 隋紅建,王剛;項目管理在R&D中應用的問題及對策[J];科學管理研究;2005年01期
7 李雪崗;;新產品研發項目經理的職權及在人力資源管理中的作用[J];企業技術開發;2010年19期
8 李燕妹;中小企業新產品開發流程的高標定位研究[J];上海管理科學;2004年01期
9 程婷婷;李偉波;程霞;;關鍵鏈新技術在項目管理中的研究和應用[J];微計算機應用;2007年05期
10 雷宏振;新產品開發與企業競爭力培育[J];西安石油學院學報(社會科學版);2001年01期
，本文編號：2368772
本文鏈接：http://www.wukwdryxk.cn/guanlilunwen/gongchengguanli/2368772.html
最近更新
教材專著
