發布時間：2018-12-18 14:45

【摘要】：擴散吸收式制冷可以采用燃?xì)�、燃油等產生的熱量驅動氨-氦工質循環進行制冷，由于不受電網束縛，在電力不穩定區域、軍事拉練、自然災害區域血液等的保存具有重要意義。 本文對采用天然工質氨水做制冷劑的擴散吸收系冰箱進行了系統熱力模型建模、熱力計算，并對關鍵部件進行了優化設計。通過對系統的理論計算和參數優化，設計了基于汽車尾氣余熱利用的車載擴散吸收式冰箱。 本文重點分析了汽車尾氣余熱制冷領域國內外研究成果及存在的問題，為下一步的數學建模、理論計算和結構設計提供幫助；建立了擴散吸收系冰箱關鍵部件的數學模型，對氨—水工質的熱力學性質進行了深入研究，建立了主要部件的數學模型，并對每一部份進行了詳盡的熱力計算，，為擴散吸收式冰箱的設計提供了理論依據；根據熱力計算結果對擴散吸收式制冷冰箱進行了結構優化設計；最后通過實驗，采用固定其他參數，改變某一參數的實驗方法，對單一因素變化對系統的影響情況作了分析，從而確定適合本系統的最佳參數。。 本文創新點，一是建立了擴散吸收系冰箱關鍵部件的數學模型，為設計提供了理論依據；二是對氨—水工質配比等關鍵參數進行了分析優化，針對本系統提出了最佳的方案。
[Abstract]:Diffusion absorption refrigeration can be cooled by the heat generated by gas, fuel, etc. The ammonia helium refrigerant cycle can be used for refrigeration. Since it is not bound by the power grid, it can be used for military training in areas with unstable power. The preservation of regional blood in natural disasters is of great significance. In this paper, the system thermodynamic model and thermodynamic calculation of diffusion-absorbent refrigerators with natural working fluid ammonia as refrigerant are carried out, and the key components are optimized. Based on the theoretical calculation and parameter optimization of the system, a vehicle diffusion absorption refrigerator is designed based on the utilization of residual heat from automobile exhaust. This paper focuses on the analysis of domestic and foreign research results and existing problems in the field of automotive exhaust waste heat refrigeration, which provides the help for the next step of mathematical modeling, theoretical calculation and structure design. The mathematical model of the key parts of the diffusion-absorbent refrigerator is established, the thermodynamic properties of the ammonia-hydraulic properties are studied in depth, the mathematical models of the main components are established, and the detailed thermodynamic calculations are carried out for each part. It provides a theoretical basis for the design of diffusion absorption refrigerator. According to the results of thermal calculation, the structure optimization design of diffusion-absorption refrigeration refrigerator is carried out. Finally, the influence of single factor on the system is analyzed by using the experimental method of fixing other parameters and changing one parameter, and the optimum parameters suitable for the system are determined. The innovation of this paper is to establish the mathematical model of the key parts of the diffusion-absorbent refrigerator, which provides the theoretical basis for the design, and the second is to analyze and optimize the key parameters such as the ratio of ammonia to water, and to put forward the best scheme for the system.
【學位授予單位】：齊魯工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB657.4

【參考文獻】

相關期刊論文 前10條

1 王磊,陸震;吸收式制冷系統動態模型的分析與建立[J];東華大學學報(自然科學版);2003年03期

2 徐士鳴,李革,張衛民;以氨-水溶液為工質的制冷/制熱潛能儲存系統特性研究[J];大連理工大學學報;2004年02期

3 蘇芬仙,敖越,蘇華,陳凌霜;引射吸收式制冷循環[J];低溫工程;2001年01期

4 李化治,崔勝國,王立;對影響擴散—吸收式冰箱COP熱力參數的分析[J];低溫與特氣;2000年06期

5 鄭丹星,陳斌,齊云,金紅光;新型氨吸收式動力/制冷復合循環的熱力學分析[J];工程熱物理學報;2002年05期

6 曾令t

本文編號：2385997