發布時間：2018-12-20 11:00

【摘要】：本課題來源于K公司技術改進實際項目,該公司是一家生產存儲類電子產品的大型跨國企業。近年來,隨著土地價格的飛漲；原材料和運輸成本的提升；人力成本的大幅增加；用戶在產品質量及性能方面的要求日益升高；眾多非正規渠道的產品的惡性競爭,制造企業利潤空間越來越小,今日及今后的發展都將面臨著巨大的挑戰和考驗。 K公司因其產品體積�。粩�(shù)量巨大；品種繁多；生產周期短,質量要求高的特點,決定了其生產工藝,特別是后序的包裝過程需要大量的操作人員手工完成,而在現今的情況下,由于勞動力成本的提升及不穩定性的增加,手工操作效率低下,質量無法保證,給公司的發展管理及盈利造成很大的困難,降低此類風險刻不容緩。 因此,K公司意圖針對后序的包裝過程進行系統化的自動化改造,本文將針對該自動化改造項目,依據項目管理理論,進行系統的可行性分析,并制定詳細的項目計劃及工作范圍的定義,為K公司提供切實可行的理論依據及執行參考。
[Abstract]:This project comes from the technical improvement project of K Company, which is a large multinational enterprise producing storage electronics. In recent years, with the rapid increase of land price, the increase of raw material and transportation cost, the substantial increase of labor cost, the demand of users in product quality and performance is increasing day by day. With the vicious competition of many products in informal channels, the profit space of manufacturing enterprises is becoming smaller and smaller. Today and in the future, the development will be faced with great challenges and tests. K company because of its small volume, large quantity, a wide variety of products; The characteristics of short production cycle and high quality requirements determine the production process, especially the post-sequence packaging process, which requires a large number of operators to complete it manually, but in the present situation, due to the increase in labor costs and instability, The efficiency of manual operation is low and the quality can not be guaranteed, which brings great difficulties to the development, management and profit of the company, so it is urgent to reduce this kind of risk. Therefore, K company intends to carry on the systematic automation transformation to the packaging process of the later sequence, this article will aim at this automation transformation project, according to the project management theory, carries on the system feasibility analysis, And the detailed project plan and the definition of the scope of work for K Company to provide practical theoretical basis and implementation reference.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB486

【參考文獻】

相關期刊論文 前10條

1 丁黎光,李伯勝,丁偉;包裝生產線機械設備的自動化[J];包裝工程;2001年04期

2 夏文匯,曾紅;工業自動化生產物流包裝量化經濟模型研究[J];包裝工程;2003年06期

3 鄭大宇,譚家玉,陶永清;商業自動化與包裝技術關系的探討[J];包裝工程;2004年01期

4 韓占華;郭飛;;自動化在包裝機械中的應用和展望[J];包裝與食品機械;2011年03期

5 唐華國;;工業自動化控制的現狀和發展趨勢分析[J];才智;2011年23期

6 馬彥紅;;工業自動化的發展現狀及其應用[J];硅谷;2010年14期

7 孟薇;;初論工業自動化儀表的選型[J];計量與測試技術;2006年04期

8 曹玉寶;;自動化生產線工件翻轉裝置設計[J];機械傳動;2010年09期

9 肖峻,劉純,莫易敏;基于信息管理的工業自動化控制系統[J];控制工程;2004年03期

10 蘇如意;代存海;趙彥軍;;包裝機械與自動化最新發展研究[J];科技致富向?qū)?2011年03期

，

本文編號：2387902