發布時間：2018-02-07 17:57

  本文關鍵詞： 轉換結構 次結構 施工過程設定 施工模擬分析 調整內力分布　出處：《建筑結構》2016年24期 　論文類型：期刊論文

【摘要】：武漢中心塔樓高區采用上掛下承式轉換結構,由于建筑功能對下承轉換梁的截面限制,轉換梁無法承受按剛度分配傳至其上的荷載。探索通過對施工過程的設定來調整荷載傳遞途徑的設計方法,以達到降低轉換梁負擔荷載的目的,并對設計設定的施工過程進行施工模擬分析,驗證其調整結構內力分布的效果,計算結果表明,設計方案能方便實施,并可以達到預期效果。
[Abstract]:Type conversion structure for Wuhan central tower by hanging high, due to the construction of function limit bearing section beam, unable to withstand the load on the transfer beam to the stiffness distribution. According to the design method to explore ways to adjust the load transfer through the construction process of the set, in order to reduce the burden on the purpose of load transfer beam and, in the process of construction design set for construction simulation analysis, verify the adjustment of internal force distribution, the calculation results show that the design scheme can be easy to implement, and can achieve the desired results.

【作者單位】： 華東建筑設計研究總院;上海超高層建筑設計工程技術研究中心;
【分類號】：TU974
，

本文編號：1494968