發布時間：2019-07-04 06:17

【摘要】：基于隧道掘進機(tunnel boring machine,TBM)現場實際掘進參數與巖石強度的相關性,提出一種現場巖石強度快速估算模型。該模型詳細分析了開敞式TBM現場實際掘進參數的趨勢,建立了其與巖石單軸抗壓強度(uniaxial compressive strength,UCS)的擬合關系式;根據回歸系數R2排序:0.761 2(貫入度指數)0.759 5(推力)0.691 5(掘進比能)0.598 6(扭矩)0.561 5(貫入度),確定采用貫入度指數(field penetration index,FPI)快速估算巖石強度UCS。與以往巖石強度經驗?zāi)Ｐ蛯?duì)比,該估算模型更具針對性和適用性。研究成果為TBM工程巖石強度的快速估算提供了一種新的切實可行的思路。
[Abstract]:Based on the correlation between the actual excavation parameters and rock strength of tunnel roadheader (tunnel boring machine,TBM), a rapid estimation model of rock strength in situ is proposed. The model analyzes in detail the trend of the actual driving parameters of the open TBM field, and establishes the fitting relationship between the model and the uniaxial compressive strength (uniaxial compressive strength,UCS of the rock. According to the order of regression coefficient R2: 0.761 2 (penetration index) 0.759 5 (thrust) 0.691 5 (heading specific energy) 0.598 6 (torque) 0.561 5 (penetration), it is determined that rock strength UCS. is estimated quickly by penetration index (field penetration index,FPI). Compared with the previous empirical model of rock strength, the estimation model is more targeted and applicable. The research results provide a new and feasible idea for the rapid estimation of rock strength in TBM project.
【作者單位】： 中國葛洲壩集團第三工程公司;中國科學院武漢巖土力學研究所巖土力學與工程國家重點實驗室;
【分類號】：U455.31
，

本文編號：2509693