基于DSP的三相異步電動機軟啟動節能裝置的研制
發布時間:2018-02-16 00:54
本文關鍵詞: 軟起動 節能 晶閘管 DSP 異步電機 仿真 出處:《黑龍江大學》2014年碩士論文 論文類型:學位論文
【摘要】:三相交流異步電動機具有結構簡單、運行可靠和價格低廉等優點而被廣泛應用。但是異步電動機存在啟動電流大,對電網和電動機本身產生嚴重影響,以及在輕載或空載運行狀態時,功率因數和效率大大降低,造成電能浪費的問題。為了改善電機的啟動特性和提高效率,新型異步電動機節能控制裝置被廣泛研究。本文的主要工作與結論是:比較分析了目前國內外常用的電機啟動和節能的方法。闡述了晶閘管三相交流調壓和調壓節能的原理。對斜坡電壓啟動和限流啟動、電流斜坡起動、軟停機控制啟動四種電機軟啟動的控制方式進行分析研究。本課題主要研究的是以DSP TMS320F2812為控制芯片的異步電動機節能軟啟動控制裝置。利用matlab的Simlink的仿真功能,搭建了異步電機軟啟動系統的仿真模型,對電機的各種啟動式進行了仿真實驗。仿真結果驗證了采用晶閘管進行三相交流調壓方案的可行性,同時驗證了該控制方法能有效的限制異步電機的啟動電流。采用模塊化的思想進行了基于DSP的控制系統設計。搭建了電機節能軟啟動器的試驗平臺,并進行了相關試驗。試驗結果表明本文設計的異步電機節能軟啟動器能夠保證電機安全帶載啟動,有效地限制電機啟動電流并在輕載狀態下節能。
[Abstract]:Three-phase AC asynchronous motor is widely used because of its simple structure, reliable operation and low price. However, the induction motor has a large start-up current, which has a serious impact on the power grid and the motor itself. The power factor and efficiency are greatly reduced when running under light load or no load, which results in the waste of electric energy. In order to improve the starting characteristics and efficiency of the motor, The main work and conclusions of this paper are as follows: comparing and analyzing the common methods of motor starting and energy saving at home and abroad, and expounding the thyristor three-phase AC voltage regulation and voltage regulation. Principles of energy conservation. For slope voltage startup and current limiting startup, Four kinds of soft start control methods of current ramp start and soft stop control start are analyzed and studied. This paper mainly studies the energy saving soft start control device of asynchronous motor based on DSP TMS320F2812. The simulation function of Simlink of matlab is used. The simulation model of soft start system of asynchronous motor is built, and the simulation experiments of various starting modes of induction motor are carried out. The simulation results verify the feasibility of using thyristor for three-phase AC voltage regulation. At the same time, it is verified that the control method can effectively limit the starting current of asynchronous motor. The design of control system based on DSP is carried out by using modularization idea. The test platform of motor energy saving soft starter is built. The test results show that the soft starter designed in this paper can ensure the safety belt start of the motor effectively limit the starting current of the motor and save energy under light load.
【學位授予單位】:黑龍江大學
【學位級別】:碩士
【學位授予年份】:2014
【分類號】:TM343.2
【參考文獻】
相關碩士學位論文 前1條
1 周俊;基于DSP的三相異步電機智能軟起動器[D];浙江大學;2006年
,本文編號:1514281
本文鏈接:http://www.wukwdryxk.cn/kejilunwen/dianlilw/1514281.html
最近更新
教材專著