發布時間：2019-01-11 11:01

【摘要】：隨著中國城市化和工業化進程的發展,鋼材的消費越來越大。我國的鋼鐵工業要實現結構的調整和資源節約的要求,實現我國鋼鐵工業由大到強的轉變。同時由于國內鋼材市場和國際鋼材市場的激烈競爭,越來越多的鋼鐵企業開始關注無頭軋制技術。傳統的無頭軋制中間坯連接技術存在連接時間長及連接設備較龐大、受坯料間隙時間的影響使生產率受到限制、無法避免的帶坯切頭去尾帶來了成材率的損失等問題,因此有必要提出一種新型的無頭軋制中間坯連接裝置。首先,本文通過對無頭軋制技術的分析,選擇了連接時間最短的中間坯連接技術—快速剪切擠壓連接法。設計出一種可以實現中間坯連接的裝置,確定了中間坯連接裝置各個零件之間的相互運動關系以及連接裝置的結構設計。計算出中間坯連接裝置的各個能力參數,對設計的部件進行了計算校核。其次,利用三維CAD軟件Solidworks對中間坯快速剪切擠壓連接裝置進行實體建模,并在裝配模式下進行裝配,之后將裝配體導入到有限元分析軟件Ansys Workbench中進行模態分析,分析每階模態對連接裝置的影響,避免連接裝置發生共振。最后,將連接裝置的裝配體模型導入到機械系統動力學自動分析軟件Adams進行運動學仿真分析,給出主要構件的運動規律、上下刀尖的水平速度以及運動軌跡,并確保了分析結果與理論分析保持一致;再對連接裝置的裝配體模型進行動力學和剛?cè)狁詈戏治?查看主要部件受力情況以及應力分布狀況,繼而判斷主要部件滿足生產需要。
[Abstract]:With the development of urbanization and industrialization in China, the consumption of steel is increasing. The iron and steel industry of our country should realize the structural adjustment and the requirement of saving resources, and realize the transformation of the iron and steel industry of our country from big to strong. At the same time, due to the fierce competition between domestic steel market and international steel market, more and more steel enterprises begin to pay attention to headless rolling technology. The traditional technology of interbillet connection in headless rolling has many problems, such as long connecting time and large connecting equipment, limited productivity due to the influence of blank gap time, and the loss of finished product rate caused by cutting and tail removal of blanks, etc. Therefore, it is necessary to put forward a new type of end-less rolling intermediate billet connection device. Firstly, through the analysis of the headless rolling technology, we select the shortest connecting time of the intermediate billet connection technology-rapid shear extrusion bonding method. A device is designed to realize the connection of the intermediate billet, and the mutual kinematic relationship between the parts of the device and the structural design of the connecting device are determined. The capability parameters of the intermediate billet connection device are calculated and the designed components are calculated and checked. Secondly, the 3D CAD software Solidworks is used to model the interbillet rapid shearing extruding device, and then the assembly is assembled in the assembly mode, and then the assembly body is imported into the finite element analysis software Ansys Workbench for modal analysis. The influence of each mode on the connection device is analyzed to avoid resonance. Finally, the assembly model of the connecting device is introduced into the mechanical system dynamics automatic analysis software Adams for kinematics simulation analysis, and the motion law of the main components, the horizontal velocity of the upper and lower blade tips and the motion track are given. The results of the analysis are consistent with the theoretical analysis. Then the dynamic and rigid-flexible coupling analysis of the assembly model of the connecting device is carried out to see the stress situation and stress distribution of the main components, and then to judge that the main components meet the production needs.
【學位授予單位】：燕山大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TG333

【相似文獻】

相關期刊論文 前10條

1 王平安;;楔形連接裝置在豎井提升中的應用[J];礦山機械;1988年05期

2 陳世忠,胡賢祥,蔡昌權;電極升降連接裝置的改進[J];工業加熱;1992年04期

3 劉劍平;于秉杰;袁林;;轉爐懸盤支承連接裝置的研究[J];黑龍江冶金;1996年03期

4 邵統漢;斜井提升不能使用直插銷的自動摘鉤器[J];煤礦設計;1982年08期

5 高彥全;石圪節礦提升罐籠使用楔形連接裝置的經驗[J];煤礦安全;1982年01期

6 葛世榮;王習術;;提升容器連接裝置的抗斷裂強度計算[J];礦山機械;1992年12期

7 李現政;王建安;;煤礦人行車緩沖式連接裝置的研制與應用[J];中小企業管理與科技(上旬刊);2013年08期

8 劉興漢;密封型鋼絲繩提升連接裝置的設計與計算[J];煤礦設計;1988年08期

9 魏振祥;日本的礦車連接裝置[J];煤礦設計;1981年03期

10 盧曉聰;;210t轉爐連接裝置的有限元分析及強度校核[J];計算機輔助工程;2012年05期

相關重要報紙文章 前1條

1 ;插銷式連接裝置[N];中國包裝報;2005年

相關碩士學位論文 前4條

1 邵長志;無頭軋制中間坯快速剪切擠壓連接裝置的設計與仿真[D];燕山大學;2016年

2 盧曉聰;210t轉爐曲柄拉桿連接裝置設計及強度分析[D];內蒙古科技大學;2012年

3 陳江輝;礦車連接裝置強度檢測系統研究[D];遼寧工程技術大學;2011年

4 董元龍;轉爐自調螺栓連接裝置力學行為研究[D];武漢科技大學;2009年

，

本文編號：2407064