發布時間：2019-01-17 19:48

【摘要】：用光學顯微鏡、X射線衍射儀以及電子萬能試驗機,研究了正擠壓-扭轉剪切變形對AZ31、AZ61和AZ80鎂合金組織和力學性能的影響。結果表明,經正擠壓-扭轉剪切變形后,鎂合金發生了顯著的晶粒細化和基面織構弱化,其中:AZ61鎂合金發生了充分的動態再結晶,可將晶粒尺寸顯著細化至3μm,隨擠壓溫度的升高,晶粒有所長大,基面織構受位錯脫釘作用而進一步弱化,AZ31鎂合金在擠壓溫度為250℃時獲得優良的力學性能,其壓縮率和抗壓強度分別高達29.2%和395 MPa。
[Abstract]:The effects of forward extrusion and torsional shear deformation on the microstructure and mechanical properties of AZ31,AZ61 and AZ80 magnesium alloys were studied by means of optical microscope, X-ray diffractometer and electronic universal testing machine. The results show that after positive extrusion and torsional shear deformation, the grain size of AZ61 magnesium alloy is reduced to 3 渭 m, and the grain size of the magnesium alloy is reduced to 3 渭 m, and the grain size of AZ61 magnesium alloy is reduced to 3 渭 m by dynamic recrystallization. With the increase of extrusion temperature, the grain size grows, the base texture is further weakened by dislocation denailing, and the mechanical properties of AZ31 magnesium alloy are obtained when the extrusion temperature is 250 鈩，

本文編號：2410321