發布時間：2018-05-05 15:54

  本文選題：WCoB基金屬陶瓷 + 顯微組織　； 參考：《材料導報》2015年02期

【摘要】：采用單質鎢粉、鈷粉和硼粉結合反應硼化燒結法制備了WCoB基金屬陶瓷,研究了WCoB基金屬陶瓷在燒結過程中的物相轉變和尺寸變化,燒結溫度對其力學性能和顯微組織的影響。結果發現:隨著燒結溫度的升高,材料物相逐漸由單質相變?yōu)槎�元硼化物相和三元硼化物�?并且材料的尺寸先發生細微收縮,再在硼化反應過程中逐漸增加,最后在液相燒結過程中逐漸減小;隨著燒結溫度的升高,WCoB基金屬陶瓷的抗彎強度和硬度先增加后減小,在1420℃達到最大,分別為1470 MPa和84.6HRA,顯著提高了WCoB基金屬陶瓷的抗彎強度。
[Abstract]:WCoB based cermets were prepared by the reaction of simple tungsten powder, cobalt powder and boron powder. The phase transition and size change of WCoB based cermet were studied. The effect of sintering temperature on the mechanical properties and microstructure of WCoB based cermet was studied. The results show that with the increase of sintering temperature, the material phase changes from simple phase to binary boride phase and ternary boride phase, and the size of the material shrinks slightly, then increases gradually in the process of boride reaction. The flexural strength and hardness of WCoB-based cermet increased first and then decreased with the increase of sintering temperature, and reached the maximum at 1420 鈩，

本文編號：1848311