換能器參數自動測量裝置設計及軟件開發
發布時間：2018-07-20 12:23
【摘要】：隨著我國科學技術的快速發展，，對海洋的開發利用越來越多。作為海洋開發的有利工具，聲納也越來越為人們所重視。一部聲納性能的好壞與水聲換能器性能直接相關，因此換能器參數測量顯得尤為重要。 換能器參數自動測量裝置是一套可以自動測量換能器參數的裝置，其設計目標是使該測量裝置具備便于操作、工作穩定可靠、測量精度和測量自動化水平高等特點，能自動完成換能器發送電壓響應等的測量。 整個自動測量裝置采用模塊化設計思路，由硬件和軟件兩個部分構成。硬件平臺以浮點DSP TMS320F28335為核心，具備掃頻信號發射、A/D采集和通過串口與計算機通信的能力。軟件部分包括：（1）利用Visual C++開發，在計算機上運行的顯控軟件，其功能包括測量參數設置，測量裝置運行狀態顯示與控制，測量結果數據顯示、自動保存、打印等；（2）在CCS環境下開發的DSP軟件程序，其功能包括對DDS、A/D的控制和對所采集數據的處理。測量裝置能夠根據顯控軟件設置，自動進行參數測量，并將測量結果回傳到上位機。測量裝置可以實現的自動測量項目包括：換能器發送電壓響應、空間指向性以及聲學環境信噪比等。此外，顯控還包括自動屏幕截圖、Word報表生成、打印控制和錯誤提示等功能。自動測量裝置的一系列測量過程能夠全自動進行，在保證測量準確的前提下，減輕了操作人員的工作量，提高了工作效率。 經過長時間實驗室測試和多次水池試驗，證明了自動測量裝置運行穩定可靠，測量結果準確，各項技術指標均達到了設計要求。
[Abstract]:With the rapid development of science and technology in China, more and more exploitation and utilization of the ocean are used. As a favorable tool for marine development, sonar is becoming more and more important. The performance of a sonar is directly related to the performance of the underwater acoustic transducer, so the measurement of the transducer parameters is especially important.
The automatic measuring device for transducer parameters is a set of devices that can automatically measure the parameters of the transducer. The design goal is to make the measuring device easy to operate, work stable and reliable, the measurement precision and the level of automation are high, and can automatically measure the transmission voltage response of the transducer.
The whole automatic measuring device is composed of two parts of hardware and software. The hardware platform is based on the floating point DSP TMS320F28335. It has the capability of frequency sweep signal transmitting, A/D collection and communication with the computer through serial port. The software part includes: (1) the display and control software that is developed by Visual C++ and running on the computer, Its function includes measurement parameter setting, measurement device running state display and control, measurement result data display, auto save, print and so on; (2) DSP software program developed in CCS environment, its function includes control of DDS, A/D and processing of collected data. Measurement device can automatically measure parameters according to the display control software The measuring results are returned to the upper computer. The automatic measurement items that can be realized by the measuring device include the transducer transmission voltage response, the spatial directivity and the acoustic environment signal to noise ratio. In addition, the display control also includes automatic screen screenshot, Word report generation, print control and error prompting. The process can be carried out automatically. Under the premise of accurate measurement, the workload of the operator is reduced and the work efficiency is improved.
After a long time laboratory test and several tank tests, it is proved that the operation of the automatic measuring device is stable and reliable, the result of the measurement is accurate, and all the technical indexes have reached the design requirements.
【學位授予單位】：哈爾濱工程大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TB565.1;TP368.1
本文編號：2133502
[Abstract]:With the rapid development of science and technology in China, more and more exploitation and utilization of the ocean are used. As a favorable tool for marine development, sonar is becoming more and more important. The performance of a sonar is directly related to the performance of the underwater acoustic transducer, so the measurement of the transducer parameters is especially important.
The automatic measuring device for transducer parameters is a set of devices that can automatically measure the parameters of the transducer. The design goal is to make the measuring device easy to operate, work stable and reliable, the measurement precision and the level of automation are high, and can automatically measure the transmission voltage response of the transducer.
The whole automatic measuring device is composed of two parts of hardware and software. The hardware platform is based on the floating point DSP TMS320F28335. It has the capability of frequency sweep signal transmitting, A/D collection and communication with the computer through serial port. The software part includes: (1) the display and control software that is developed by Visual C++ and running on the computer, Its function includes measurement parameter setting, measurement device running state display and control, measurement result data display, auto save, print and so on; (2) DSP software program developed in CCS environment, its function includes control of DDS, A/D and processing of collected data. Measurement device can automatically measure parameters according to the display control software The measuring results are returned to the upper computer. The automatic measurement items that can be realized by the measuring device include the transducer transmission voltage response, the spatial directivity and the acoustic environment signal to noise ratio. In addition, the display control also includes automatic screen screenshot, Word report generation, print control and error prompting. The process can be carried out automatically. Under the premise of accurate measurement, the workload of the operator is reduced and the work efficiency is improved.
After a long time laboratory test and several tank tests, it is proved that the operation of the automatic measuring device is stable and reliable, the result of the measurement is accurate, and all the technical indexes have reached the design requirements.
【學位授予單位】：哈爾濱工程大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TB565.1;TP368.1
【參考文獻】
相關期刊論文 前10條
1 鄒漢斌,雷紅艷;在VC~(++)6.0中利用MFC類庫實現打印功能[J];湖南文理學院學報(自然科學版);2004年02期
2 吳巍;李相平;段魯生;;一種基于A/D和DSP的高速數據采集技術[J];單片機與嵌入式系統應用;2007年03期
3 陳文輝;賈非;;基于DDS的頻譜分析儀設計[J];國外電子元器件;2008年12期
4 周京生;MFC應用程序框架打印預覽功能分析與擴展[J];電腦編程技巧與維護;2000年09期
5 熊瑜容;柴毅;王淑娟;王嘉騏;;基于VC++的Word文檔自動生成技術[J];計算機時代;2010年01期
6 戈敏霞,張育平;Visual C++中的自動化客戶端[J];計算機應用研究;2001年10期
7 濮東華,陳離,徐伯慶;利用MFC設計打印程序的相關技術[J];山東電子;2001年03期
8 申屠浩,鮑可進;用VC++語言創建WORD文檔[J];計算機工程與設計;2004年06期
9 劉春雷,吳重光;用VC實現Word自動化操作的研究與應用[J];計算機工程與設計;2004年09期
10 邸未冬;;淺談在MFC中實現打印功能的方法[J];忻州師范學院學報;2006年04期
本文編號：2133502
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/jisuanjikexuelunwen/2133502.html
最近更新
教材專著
