發布時間：2018-07-21 14:35

【摘要】：隨著電子技術的快速發展,嵌入式系統已經成為熱點,大量應用在工業設備以及家用電器當中。當今光電檢測技術逐漸向小型化、智能化、高效率方向發展,非接觸測量是檢測技術研究的主要內容之一。本文使用AVR作為激光掃描檢測系統的主控制器,將掃描檢測技術與計算機技術結合。通過控制掃描光學系統,光電接收器件,電子學處理系統和計算機處理系統,將攜帶被測工件徑向直徑信息的光束進行接收、轉換、處理,從而實現了被測工件徑向尺寸的測量。 本文從嵌入式方面實現了掃描檢測系統小型化智能化設計,文中詳細論述了激光掃描檢測系統的檢測原理和方法,對轉鏡的掃描速度進行了分析,對掃描光束進行了整形設計,同時對激光掃描檢測系統的電路部分以及軟件部分進行了設計。從實驗結果可以看出,本文設計的檢測系統誤差在±2μ m內。
[Abstract]:With the rapid development of electronic technology, embedded system has become a hot spot, a large number of applications in industrial equipment and household appliances. Nowadays, photoelectric detection technology is developing towards miniaturization, intelligence and high efficiency. Non-contact measurement is one of the main contents of detection technology. In this paper, AVR is used as the main controller of laser scanning detection system, which combines scanning detection technology with computer technology. By controlling the scanning optical system, the photoelectric receiver, the electronic processing system and the computer processing system, the beam carrying the information of the radial diameter of the workpiece is received, converted and processed. Thus, the radial dimension of the workpiece is measured. In this paper, the miniaturization and intelligent design of scanning detection system is realized from the embedded aspect. The detection principle and method of laser scanning detection system are discussed in detail. The scanning speed of rotating mirror is analyzed, and the scanning beam is shaped and designed. At the same time, the circuit and software of the laser scanning detection system are designed. It can be seen from the experimental results that the error of the detection system designed in this paper is within 鹵2 渭 m.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TN247;TP368.1

【參考文獻】

相關期刊論文 前10條

1 張國玉,安志勇,張從周,李成志,高玉軍;應用半導體激光器的尺寸測量系統研究[J];兵工學報;1997年02期

2 徐熙平,張國玉,安志勇,李成志;反射式激光掃描檢測系統研究[J];兵工學報;2002年03期

3 王立剛;張殿元;;低噪聲光電檢測電路的研究與設計[J];電測與儀表;2007年08期

4 畢紀軍;如何設計激光掃描系統[J];激光與光電子學進展;2001年04期

5 陳炳林,張河,孫全意;脈沖式半導體激光器準直光學系統的設計[J];激光技術;2003年03期

6 劉興占,劉向東;激光掃描鏡的應用研究[J];激光技術;1998年06期

7 朱順華;王成春;鄒逢興;;單片機控制系統的硬件抗干擾設計[J];微計算機信息;2007年23期

8 張全法,齊紅基,黃立華,何金田;動態線材直徑測量新方法[J];儀表技術與傳感器;2001年01期

9 李為民,俞巧云,裘凌紅;投影法CCD測徑系統[J];儀表技術與傳感器;2001年01期

10 王秀琳,黃文財,郭福源;半導體激光束準直系統的研究[J];應用光學;1999年01期

，

本文編號：2135838