發布時間：2018-01-05 23:06

  本文關鍵詞：單向環型設備多目標動態布局優化設計研究　出處：《杭州電子科技大學》2011年碩士論文　論文類型：學位論文

  更多相關文章： 單向環型設備布局 動態布局 多目標優化模型 模擬退火法 軟件開發

【摘要】：現如今,隨著信息網絡和市場的全球化,制造業面臨著巨大的挑戰。市場環境變動迅速、產品的生命周期日益縮短,迫使生產企業只有迅速的調整設備布局才能緊跟市場的步伐。在這樣的背景下,傳統的靜態設備布局方法已不能勝任布局設計工作,需引進動態的設備布局方法。動態設備布局指的是在設備布局的過程中不僅要考慮當前周期產品的生產還要考慮不遠的將來產品的生產,使得最終采用的設備布局能夠取得最大的經濟效益。此外,設備布局問題所涉及的定量和定性影響因素眾多,在評價設備布局優劣的過程中需要兼顧多個方面。 設備布局的合理與否直接影響企業的經濟效益,它是一個急需解決而又沒有解決好的重大問題。本文首先對單元內設備布局問題的相關理論進行了系統的分析,包括設備布局的原則、布局的形式和物流設備、布局的方法、布局評價技術以及優化目標和約束條件,其中特別是對設備布局的建模和優化算法進行了深入的分析。經過分析比對以及參考已有的研究成果,本文采用二次分配建模方法和模擬退火法進行優化計算。 對于設備布局問題,本文以單向環型設備布局為研究對象,在綜合分析影響單向環型設備布局的各種因素的基礎上,提出一種多目標動態布局優化設計方法。將物料搬運費用、重新布局費用和設備間鄰接關系作為三個子目標,建立單向環型設備動態布局的多目標優化模型。多目標優化問題的解決方法則是利用最短距離理想點法,將多目標的優化問題轉化為單目標進行優化。在結合本文優化模型的基礎上,詳細分析了模擬退火法的優化流程并對優化過程中所需注意的新解產生機制、新解接受準則和模擬退火法的參數設置進行了重點分析。 最后利用VC語言的MFC開發了單向環型設備多目標動態布局輔助優化設計軟件,并在此軟件的基礎上對工程實例進行計算。通過實例計算,優化結果表明本文所提出的動態設備布局方法比傳統的靜態布局方法要優,能起到明顯降低生產成本的作用。此外,還采用置信區間法對本文的優化模型和求解方法的有效性進行確認。
[Abstract]:Nowadays, with the globalization of information network and market, the manufacturing industry is facing great challenges. The market environment changes rapidly and the product life cycle is shortened day by day. In order to keep pace with the market, the traditional static equipment layout method can not do the layout design work. It is necessary to introduce dynamic equipment layout method. Dynamic equipment layout refers to not only the production of products in the current cycle but also the production of products in the near future in the process of equipment layout. The final equipment layout can achieve the maximum economic benefits. In addition, there are many quantitative and qualitative factors affecting the equipment layout. In the process of evaluating the layout of equipment, it is necessary to give consideration to many aspects. Whether the equipment layout is reasonable or not directly affects the economic benefit of the enterprise. It is an important problem that needs to be solved but has not been solved well. Firstly, this paper makes a systematic analysis of the related theories of the equipment layout problem in the unit, including the principle of the equipment layout, the form of the layout and the logistics equipment. The layout method, layout evaluation technology, optimization objectives and constraints, especially the modeling and optimization algorithm of equipment layout are deeply analyzed. After analysis and comparison, and referring to the existing research results. In this paper, quadratic assignment modeling method and simulated annealing method are used to optimize calculation. For the problem of equipment layout, this paper takes the one-way loop type equipment layout as the research object, on the basis of synthetically analyzing the various factors that affect the one-way ring type equipment layout. In this paper, a multi-objective dynamic layout optimization method is proposed. The three sub-objectives are material handling cost, re-layout cost and equipment adjacency. The multi-objective optimization model for the dynamic layout of unidirectional loop equipment is established. The solution to the multi-objective optimization problem is to use the shortest distance ideal point method. The multi-objective optimization problem is transformed into single-objective optimization. Based on the optimization model in this paper, the optimization process of simulated annealing method is analyzed in detail, and the mechanism of generating new solutions in the optimization process is analyzed in detail. The parameter setting of the new solution acceptance criterion and simulated annealing method is analyzed emphatically. Finally, the software of multi-objective dynamic layout aided optimization design of unidirectional loop equipment is developed by using VC language MFC. Based on the software, the engineering example is calculated. The optimization results show that the dynamic equipment layout method proposed in this paper is superior to the traditional static layout method and can obviously reduce the production cost. The confidence interval method is also used to confirm the validity of the optimization model and the solving method.
【學位授予單位】：杭州電子科技大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH181

【參考文獻】

相關期刊論文 前10條

1 吳立人;仿真模型有效性定量確認方法[J];導彈與航天運載技術;2000年04期

2 張亞南;闞樹林;王越;;用蟻群算法解決動態設施布置問題[J];工業工程;2007年02期

3 王定益,王麗亞;一種改進遺傳算法在生產車間設備布局中的應用[J];計算機工程與應用;2005年14期

4 李志華,鐘毅芳,劉繼紅;制造系統中的單向環型設備布局設計[J];計算機輔助設計與圖形學學報;2003年07期

5 鎖小紅;劉戰強;;制造系統設備布局的建模理論與求解方法[J];計算機集成制造系統;2007年10期

6 邢繼娟;葛含益;卜廣志;;仿真模型置信度分析方法研究[J];軍事運籌與系統工程;2005年04期

7 李志華,劉小思,顧廣華;齒輪泵齒輪基本參數的優化設計[J];江西農業大學學報;1997年03期

8 李志華,王啟富,鐘毅芳,周亦波;物流網絡設計建模與求解算法研究[J];機械工程學報;2003年02期

9 江坤;錢林方;徐亞棟;;某炮口制退器的多目標優化設計[J];系統仿真學報;2007年15期

10 顧農,譚民,范英俐,郁文生;制造系統的可重構布局設計[J];信息與控制;2001年S1期

相關博士學位論文 前1條

1 胡廣華;制造車間布局優化方法研究與系統實現[D];華中科技大學;2007年

相關碩士學位論文 前3條

1 曹戰;基于遺傳算法的車間設備布局問題研究[D];大連交通大學;2007年

2 吳暢;可添加/去除機器的動態布局優化研究[D];上海交通大學;2008年

3 邱楓;基于單親遺傳算法的設備布局問題研究[D];天津大學;2007年

，

本文編號：1385225