發布時間：2018-08-12 07:35

【摘要】：本文作者所工作的公司是某集團的核心支柱企業，銷量、收入、利潤、單位面積產出等各項綜合指標位列全球工程機械行業前列。作者利用在公司學習工作的機會，，將所學的工業工程知識運用于實踐之中，對本公司六分廠的轉臺裝配線的現狀、線平衡進行分析，經過個人觀察、研究，并與現場工人、生產管理人員進行緊密接觸和溝通，再結合多年工作經驗，收集到了大量的一線資料，綜合分析發現了公司轉臺裝配線在工位劃分、貨物擺放、人員分配、行車調度方面存在的問題。因此，對線平衡問題進行研究，對公司具有很大的現實意義。 本文主要對轉臺裝配線線平衡進行研究。裝配線平衡就是為了解決工序間作業負荷不均衡的問題而提出的，它是現場IE的一種管理手法，也是解決裝配線負荷平均化這一影響裝配線效率關鍵問題的重要方法。本論文從分析轉臺線瓶頸工位，計算裝配線平衡率著手，通過5wlH法及EcRs四項原則對轉臺裝配線的瓶頸工位進行改善，使各工位得到均衡。然后對起重機轉臺裝配線進行線平衡仿真：通過對轉臺裝配線現場布局及物流情況進行現場仿真，并對裝配線進行物流及信息流仿真，得到可比性數據，進行仿真結果分析并實施改善。最后確立起重機轉臺線標準作業，根據線平衡的改善及各工位操作內容制定各工位標準作業要領書。
[Abstract]:The company in which the author works is the core pillar enterprise of a certain group. The sales volume, revenue, profit, output per unit area and other comprehensive indexes rank among the top in the global construction machinery industry. Taking advantage of the opportunity of studying and working in the company, the author applies the industrial engineering knowledge he has learned in practice, analyzes the present situation and line balance of the turntable assembly line of our company's sixth branch factory, after personal observation, studies, and works with the workers on the spot. Production management personnel are in close contact and communication, combined with many years of work experience, collected a large number of front-line data, comprehensive analysis found that the company turntable assembly line in the division of work, goods placement, personnel distribution, Problems in vehicle scheduling. Therefore, the study of line balance is of great practical significance to the company. This paper mainly studies the balance of turntable assembly line. The balance of assembly line is put forward to solve the problem of unbalanced work load between working procedures. It is a management technique of IE on the spot and an important method to solve the key problem that affects the efficiency of assembly line such as average load of assembly line. In this paper, the bottleneck work station of turntable line is analyzed, the balance rate of assembly line is calculated, and the bottleneck work station of turntable assembly line is improved by 5wlH method and EcRs principle, so that each station can be balanced. Then carry on the line balance simulation to the assembly line of the crane turntable: through the field simulation to the layout and the logistics situation of the assembly line of the turntable, and carry on the logistics and information flow simulation to the assembly line, get the comparable data. Analysis of simulation results and implementation of improvement. Finally, the standard operation of the crane turntable line is established, and the standard operating essentials of each station are formulated according to the improvement of line balance and the operation content of each station.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH113.25

【參考文獻】

相關期刊論文 前10條

1 王仕卿 ,宋建林 ,李景元;談精益生產方式在車間生產中的作用[J];車間管理;2005年01期

2 孫建華,高廣章,蔣志強;生產線平衡的手段與方法研究[J];成組技術與生產現代化;2004年04期

3 郭伏;模特法在生產線能力平整中的應用[J];東北大學學報(社會科學版);2003年01期

4 鄭江春;李軍;;方法研究在G公司作業標準制定中的應用[J];大眾科技;2008年11期

5 曹樂;王彪;劉飛;李聰波;;裝配線多技能作業人員優化配置模型[J];重慶大學學報;2010年12期

6 劉廣;運用流程程序分析法優化攤鋪機裝配流程[J];工程機械;2005年06期

7 林強;應用工作研究原理提高工作效率[J];工程機械;2005年10期

8 李ng范;李從東;;工業工程(第四講) 流程分析及其在機械工業中的應用[J];工程機械;2005年12期

9 張志秋;;淺述汽車起重機底盤裝配線工藝及設備[J];工程建設與設計;2010年04期

10 林筠,李隨成;多品種可變流水線平衡及改善[J];工業工程;2000年02期

相關碩士學位論文 前1條

1 羅卓;裝配線平衡系統研究與開發[D];廣東工業大學;2006年

本文編號：2178357