發布時間：2018-08-12 07:46

【摘要】：牙輪鉆機采用靜液壓制動,需要避免系統壓力波動對泵產生的沖擊,同時鉆機的動能或者勢能可以回收再利用。通過對靜液壓制動系統的計算與仿真分析,對閉式泵高壓溢流閥參數進行調整,減小系統壓力沖擊;提出了制動系統能量回收方案,并對能量回收系統進行了數學建模與仿真分析,獲得了蓄能器氣腔壓力隨時間的增長關系,揭示了節流閥開度大小與制動時間的關系;對制動系統能量回收效率進行了計算。證明了牙輪鉆機采用靜液壓制動系統的正確性以及能量回收方案的可行性,實現了將鉆機動能或者勢能轉換為蓄能器壓力能的能量回收,為大型車輛制動系統能量回收提供了參考。
[Abstract]:The hydraulic brake is used in the rotary drilling rig, so it is necessary to avoid the impact of the pressure fluctuation on the pump, and the kinetic energy or potential energy of the drilling rig can be recovered and reused. Through the calculation and simulation analysis of hydrostatic braking system, the parameters of high pressure relief valve of closed pump are adjusted to reduce the pressure shock of the system, and the energy recovery scheme of braking system is put forward. The mathematical modeling and simulation analysis of the energy recovery system are carried out, and the relationship between the gas chamber pressure of the accumulator and the time is obtained, the relationship between the throttle opening and the braking time is revealed, and the energy recovery efficiency of the braking system is calculated. The correctness of the hydrostatic braking system and the feasibility of the energy recovery scheme are proved, and the energy recovery from the kinetic energy or potential energy of the drilling rig to the pressure energy of the accumulator is realized. It provides a reference for energy recovery of large vehicle braking system.
【作者單位】： 秦皇島天業通聯重工股份有限公司;燕山大學河北省重型機械流體動力傳輸與控制重點實驗室 先進鍛壓成型技術與科學教育部重點實驗室(燕山大學);
【分類號】：TH137

【相似文獻】

相關期刊論文 前4條

1 付昌林，孫文昌;液壓制動裝置的故障及診斷[J];河北農機;1996年06期

2 湯何勝;，

本文編號：2178394