發布時間：2018-04-14 19:17

  本文選題：應力-強度模型 + 瑞利分布��； 參考：《吉林大學》2017年碩士論文

【摘要】：應力-強度模型在機械裝置或電器元件的可靠性評估中應用廣泛,其中,應力定義為引起元件或裝置失效的載荷,強度定義為元件或裝置在承受外部載荷時能滿意地完成規定任務而沒有失效的能力,可靠性參數定義為影響失效的應力沒有超過控制失效的強度的概率.本文研究的是應力和強度均服從瑞利分布且?guī)в挟惓Ｖ档膽?yīng)力-強度模型的參數估計問題,用數學語言來表述,即研究可靠性參數R=P(YX)的估計問題,其中變量Y和X是相互獨立的,變量Y代表應力,服從參數是λ的瑞利分布,變量X代表強度,樣本中帶有2個異常值,服從參數是θ和β的瑞利分布.在國外學者對帶有異常值的應力-強度模型的研究中,對參數R的估計基本以經典估計方法為主,運用貝葉斯估計方法的研究文章相對較少,國內學者對應力-強度模型的研究基本不涉及試驗樣本帶有異常值的情況.在本文中,將運用貝葉斯估計的方法來研究參數R=P(YX)的估計問題,相較于經典方法把未知參數看作是確定的常數,貝葉斯估計把未知參數看作是隨機變量,利用樣本分布和先驗分布的全部信息來進行統計推斷.在本文中,參數R的貝葉斯估計將會在平方損失,0-1損失和對稱熵?fù)p失這三種損失函數下給出,并根據推導得到的結果進行估計值偏差的數值模擬,然后比較這三種損失函數下得到的貝葉斯估計值的估計效果,最后得出結論,運用貝葉斯估計的方法來研究帶有異常值的應力-強度模型行之有效.
[Abstract]:The stress-strength model is widely used in the reliability evaluation of mechanical or electrical components, in which the stress is defined as the load that causes the failure of the components or devices.Strength is defined as the ability of components or devices to perform specified tasks satisfactorily without failure under external load. The reliability parameter is defined as the probability that the stress affecting failure does not exceed the strength of control failure.In this paper, we study the parameter estimation of stress-strength model with Rayleigh distribution and outliers, which is expressed by mathematical language, that is, the estimation of reliability parameter RPX.The variables Y and X are independent of each other, the variable Y represents the stress, the subordinate parameter is the Rayleigh distribution of 位, the variable X represents the strength, the sample has two abnormal values, and the subordinate parameter is the Rayleigh distribution of 胃 and 尾.In the research of stress-strength model with outliers abroad, the estimation of parameter R is mainly based on classical estimation method, but there are few articles using Bayesian estimation method.The research on the stress-strength model by domestic scholars basically does not involve the case where the test sample has outliers.In this paper, the Bayesian estimation method is used to study the parameter estimation problem. Compared with the classical method, the unknown parameter is regarded as a definite constant, and the unknown parameter is regarded as a random variable in Bayesian estimation.All the information of sample distribution and prior distribution are used for statistical inference.In this paper, the Bayesian estimation of parameter R will be given under the three loss functions of squared loss 0-1 loss and symmetric entropy loss.The results of Bayesian estimation under these three loss functions are compared, and the conclusion is drawn that it is effective to use Bayesian estimation to study the stress-strength model with outliers.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：O212.8

【參考文獻】

相關期刊論文 前8條

1 王曉紅;欒江輝;;定時截尾瑞利分布的Bayes估計[J];通化師范學院學報;2012年12期

2 趙彩云;;瑞利(Rayleigh)分布的先驗似然估計[J];佳木斯大學學報(自然科學版);2011年06期

3 任海平;;對稱熵?fù)p失函數下Rayleigh分布參數的Bayes估計[J];江西理工大學學報;2010年05期

4 肖小英;任海平;;應力、強度分別服從伽瑪分布和指數分布的干涉模型可靠度的Bayes分析[J];南昌教育學院學報;2009年02期

5 張婧;任海平;;應力、強度均服從瑞利(Rayleigh)分布的可靠性分析[J];數學理論與應用;2007年03期

6 李中恢;任海平;周慧;;一類應力—強度干涉模型的Bayes可靠性分析[J];上饒師范學院學報;2007年03期

7 張士峰;應力-強度模型的Bayes可靠性分析[J];國防科技大學學報;2000年03期

8 周源泉;結構可靠性的經典、Bayes及Fiducial限[J];儀器儀表學報;1986年04期

，

本文編號：1750658