發布時間：2018-07-29 13:48

【摘要】：耐壓結構是潛艇、潛器等得以順利開展工作的載體和保障,鈦合金以其具有高比強度、耐腐蝕、低磁性等諸多優點,在深海耐壓結構中替代傳統材料有明顯的優勢。然而,相對于傳統的鋼制耐壓結構,鈦合金的蠕變問題不容忽視。本文通過鈦絲懸掛拉伸試驗、理論推導、數值分析和模型試驗等途徑,研究了鈦合金及鈦合金結構的常溫蠕變特性,取得了以下主要成果:1、通過常溫懸掛拉伸試驗,測試不同應力狀態下鈦合金絲蠕變變形隨時間的變化規律,證實了常溫蠕變與中高溫蠕變的顯著差異,選取了適用于鈦合金常溫蠕變的蠕變本構關系,并擬合蠕變參數,是進行深海耐壓結構蠕變計算的前提。2、用數值方法分析了球殼和環肋圓柱殼的蠕變特性,通過系列計算給出了可供參考的蠕變變形和應力重分布特征,著重分析了肋骨形式和截面尺寸對環肋圓柱殼蠕變特性的影響,并初步研究了當模型存在初始幾何缺陷或開孔時蠕變對幾何缺陷幅值和穩定性的影響。3、基于一般方程,首次給出了環肋圓柱殼結構殼板和肋骨腹板蠕變變形及應力重分布的瞬態解,能夠與數值解較好的吻合,為理論分析環肋圓柱殼蠕變特征提供了基礎。4、本文設計了一種耐壓結構蠕變測試方法,首次開展了鈦合金環肋圓柱殼模型外壓蠕變試驗。首次測得了TC4鈦合金耐壓結構的壓縮蠕變,并與數值計算結果進行對比,初步驗證了數值計算的可靠性,為耐壓結構蠕變研究提供了新方法。
[Abstract]:The pressure resisting structure is the carrier and guarantee for the submarine, submarine and so on to carry out the work smoothly. Because of its high specific strength, corrosion resistance, low magnetism and so on, titanium alloy has obvious advantage in replacing the traditional material in the deep sea pressure resisting structure. However, the creep problem of titanium alloy can not be ignored compared with the traditional steel structure. In this paper, the creep properties of titanium alloy and titanium alloy structure at room temperature are studied by means of tensile test, theoretical derivation, numerical analysis and model test of titanium wire suspension. The following main achievements have been obtained: 1, and through the tensile test of hanging tension at room temperature, the creep behavior of titanium alloy and titanium alloy structure has been studied. The variation of creep deformation of titanium alloy wire with time under different stress states is tested, and the significant difference between normal temperature creep and moderate high temperature creep is confirmed. The creep constitutive relation suitable for normal temperature creep of titanium alloy is selected and the creep parameters are fitted. The creep characteristics of spherical shell and circular cylindrical shell are analyzed by numerical method, and the creep deformation and stress redistribution characteristics for reference are given through a series of calculations. The influence of rib form and section size on creep behavior of circular cylindrical shell is analyzed, and the influence of creep on the amplitude and stability of circular cylindrical shell is studied when there are initial geometric defects or holes in the model. For the first time, the transient solution of creep deformation and stress redistribution of shell plate and rib web plate of ring-ribbed cylindrical shell structure is presented, which is in good agreement with the numerical solution. In this paper, a creep test method for pressure resistant structure is designed, and the creep test of titanium alloy cylindrical shell model under external pressure is carried out for the first time. The compressive creep of TC4 titanium alloy is measured for the first time, and the results are compared with the numerical results. The reliability of the numerical calculation is preliminarily verified, which provides a new method for the study of the creep of the compressive structure.
【學位授予單位】：中國艦船研究院
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：U661.42

【參考文獻】

相關期刊論文 前5條

1 劉濤;;深海載人潛水器耐壓球殼設計特性分析[J];船舶力學;2007年02期

2 洪杰;高金海;馬艷紅;王建軍;;火焰筒局部蠕變屈曲分析方法[J];航空動力學報;2010年02期

3 饒壽期;航空發動機的高溫蠕變分析[J];航空發動機;2004年01期

4 蔣文春;鞏建鳴;陳虎;涂善東;;不銹鋼板翅結構蠕變的有限元分析[J];金屬學報;2007年05期

5 雷友鋒,程衛華,徐林耀;航空發動機燃燒室蠕變屈曲研究[J];燃氣渦輪試驗與研究;2001年04期

相關博士學位論文 前1條

1 聶德福;結構鋼的室溫蠕變及其對疲勞裂紋擴展的影響[D];大連理工大學;2008年

相關碩士學位論文 前4條

1 姚程;鎳基單晶渦輪葉片蠕變特性研究[D];哈爾濱工業大學;2010年

2 汪軍;鈦合金的蠕變行為研究[D];哈爾濱工業大學;2008年

3 楊志磊;多軸應力狀態下管彎頭蠕變分析[D];華北電力大學;2012年

4 張博文;水下新型環形耐壓結構理論與試驗研究[D];中國艦船研究院;2014年

，

本文編號：2152871