無線傳感器網絡在農業溫室測控系統中的應用
發布時間：2025-01-15 10:49
無線傳感器網絡(WSN)將傳感器、計算和通信與微型設備結合起來。在現代農業中,無線傳感器網絡(WSN)為植物的環境監測和控制提供了一種簡單而經濟的解決方案。監測的重要參數包括濕度和溫度。本文提出一種使用了 ZigBee技術的智能低成本無線傳感器網絡。隨著無線傳感器網絡(WSN)的發展,一種新型的不需要現場布線的溫室無線監控系統,己成為農業溫室領域的新需求。在所提出的背景下,基于近場通信技術ZigBee和長距離無線通信技術,本文提出并設計了一種新的溫室監測系統WSN模型。它具有數據傳輸可靠,維護方便,成本低的特點。首先,我們在每個溫室建立了一個Zigbee無線傳感器網絡,它有一個中心節點和多個采集節點。然后每個中心節點連接到GSM/GPRS模塊。然后,在這些中心節點上,通過GSM/GPRS模塊,在溫室管理員的移動電話和PC機之間建立了 一個遠程無線通信網絡。系統測試結果表明,以Zigbee和GPRS為核心的無線傳感器網絡系統,結合溫室監測系統的數據庫管理程序,是有效、可靠和可行的。這為溫室監測系統的發展開辟了一個新的階段。
【文章頁數】：75 頁
【學位級別】：碩士
【文章目錄】：
Abstract
摘要
Chapter 1 Introduction
1.1 Background and significance of the project
1.2 WSN Current status and characteristics of development
1.2.1 Wireless communication Technology
1.2.2 WSN
1.3 Agricultural greenhouse monitoring system in China
1.3.1 Research agricultural greenhouse monitoring system in China
1.3.2 Application of Wireless sensor network in greenhouse monitoringsystem
1.4 Main works of the thesis
Chapter 2 System Requirements Analysis and Model Design
2.1 System Requirements Analysis
2.2 Zigbee Technology to Build Close-range WSN
2.2.1 Zigbee protocol
2.2.2 Zigbee Device Types and Topology
2.2.3 Zigbee Routing Protocol
2.2.4 Zigbee Technical Features and WSN
2.3 Summary of this chapter
Chapter 3 Zigbee wireless sensor network design
3.1 Zigbee data acquisition node hardware design
3.1.1 Data Processing Module
3.1.2 Temperature Acquisition Module
3.1.3 Light intensity acquisition module
3.1.4 Zigbee wireless transceiver module
3.1.5 Serial Communication Module
3.1.6 Power Module Design
3.2 Zigbee data acquisition node software design
3.2.1 Temperature Acquisition Module Software Design
3.2.2 Software Design of Light intensity acquisition Module
3.2.3 Design of Serial Communication Software
3.3 Design of Zigbee Coordinator Node
3.4 Zigbee Wireless Communication Design
3.4.1 Design of ZigBee Protocol Stack
3.4.2 Coordinator building network
3.4.3 Routers join the network
3.4.4 Terminal equipment joining the network
3.5 Summary of this chapter
Chapter 4 Design of GSM/GPRS remote Wireless Transmission system
4.1 Hardware design
4.2 Software Design of the system module software includes two parts
4.2.1 PDU Code C There are 3 modes of SMS Short messagecommunication
4.3 Summary of this chapter
Chpter 5 Database Management System
5.1 System Model Design
5.2 Data Reception and Transmission
5.3 Database Links and Operations
5.4 User Interface Design
5.5 Summary of this chapter
Chapter 6 Testing and Analysis
6.1 Hardware Test
6.2 Zigbee Wireless Communication Test
6.2.1 Zigbee Network Test
6.2.2 Zigbee Data Reliability Test
6.3 AT command set control GSM/GPRS module test
6.4 Overall Functional Test
6.5 Summary of this chapter
Conclusion
References
Acknowledgement
本文編號：4027289
【文章頁數】：75 頁
【學位級別】：碩士
【文章目錄】：
Abstract
摘要
Chapter 1 Introduction
1.1 Background and significance of the project
1.2 WSN Current status and characteristics of development
1.2.1 Wireless communication Technology
1.2.2 WSN
1.3 Agricultural greenhouse monitoring system in China
1.3.1 Research agricultural greenhouse monitoring system in China
1.3.2 Application of Wireless sensor network in greenhouse monitoringsystem
1.4 Main works of the thesis
Chapter 2 System Requirements Analysis and Model Design
2.1 System Requirements Analysis
2.2 Zigbee Technology to Build Close-range WSN
2.2.1 Zigbee protocol
2.2.2 Zigbee Device Types and Topology
2.2.3 Zigbee Routing Protocol
2.2.4 Zigbee Technical Features and WSN
2.3 Summary of this chapter
Chapter 3 Zigbee wireless sensor network design
3.1 Zigbee data acquisition node hardware design
3.1.1 Data Processing Module
3.1.2 Temperature Acquisition Module
3.1.3 Light intensity acquisition module
3.1.4 Zigbee wireless transceiver module
3.1.5 Serial Communication Module
3.1.6 Power Module Design
3.2 Zigbee data acquisition node software design
3.2.1 Temperature Acquisition Module Software Design
3.2.2 Software Design of Light intensity acquisition Module
3.2.3 Design of Serial Communication Software
3.3 Design of Zigbee Coordinator Node
3.4 Zigbee Wireless Communication Design
3.4.1 Design of ZigBee Protocol Stack
3.4.2 Coordinator building network
3.4.3 Routers join the network
3.4.4 Terminal equipment joining the network
3.5 Summary of this chapter
Chapter 4 Design of GSM/GPRS remote Wireless Transmission system
4.1 Hardware design
4.2 Software Design of the system module software includes two parts
4.2.1 PDU Code C There are 3 modes of SMS Short messagecommunication
4.3 Summary of this chapter
Chpter 5 Database Management System
5.1 System Model Design
5.2 Data Reception and Transmission
5.3 Database Links and Operations
5.4 User Interface Design
5.5 Summary of this chapter
Chapter 6 Testing and Analysis
6.1 Hardware Test
6.2 Zigbee Wireless Communication Test
6.2.1 Zigbee Network Test
6.2.2 Zigbee Data Reliability Test
6.3 AT command set control GSM/GPRS module test
6.4 Overall Functional Test
6.5 Summary of this chapter
Conclusion
References
Acknowledgement
本文編號：4027289
本文鏈接：http://www.wukwdryxk.cn/kejilunwen/zidonghuakongzhilunwen/4027289.html
最近更新
教材專著
